przenośny dysk usb i slackware 13.1

Gdy jakieś urządzenie nie chce w Slackware działać...

Moderatorzy: Moderatorzy, Administratorzy

cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

ok ale to jak wróce do domu bo teraz w pracy jestem.

Pamiętam ze kiedyś musiałem grzebać w /etc/group zeby pendrive zadziałał a teraz nic nie grzebałem i działa może może trzeba tam pogrzebać zeby dysk odpalić. nie mam juz pomysłów do tego :/ wroce z pracy to zobaczymy co wyjdzie z tego
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

witam

uname -a

Kod: Zaznacz cały

Linux s2 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) PentiuR) D  CPU 2.66GHz GenuineIntel GNU/Linux
lspci

Kod: Zaznacz cały

00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
02:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent]
02:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]
lsmod

Kod: Zaznacz cały

Module                  Size  Used by
radeon                650763  2 
ttm                    39060  1 radeon
drm_kms_helper         23751  1 radeon
drm                   133002  5 radeon,ttm,drm_kms_helper
i2c_algo_bit            4355  1 radeon
snd_seq_dummy           1107  0 
snd_seq_oss            25580  0 
snd_seq_midi_event      4620  1 snd_seq_oss
snd_seq                42857  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            33917  0 
snd_mixer_oss          13399  1 snd_pcm_oss
appletalk              23278  20 
psnap                   1564  1 appletalk
llc                     3005  1 psnap
ipv6                  229909  26 
pcmcia                 27872  0 
pcmcia_core            25659  1 pcmcia
lp                      7161  0 
fuse                   52401  1 
fan                     2702  0 
snd_via82xx            17636  2 
gameport                7041  1 snd_via82xx
snd_ac97_codec         89467  1 snd_via82xx
ac97_bus                 822  1 snd_ac97_codec
snd_pcm                57736  3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
thermal                10194  0 
usbhid                 33016  0 
processor              26515  0 
ppdev                   5103  0 
thermal_sys            12086  3 fan,thermal,processor
snd_timer              15699  2 snd_seq,snd_pcm
snd_page_alloc          5849  2 snd_via82xx,snd_pcm
snd_mpu401_uart         5051  1 snd_via82xx
i2c_viapro              5055  0 
snd_rawmidi            15557  1 snd_mpu401_uart
parport_pc             18027  1 
snd_seq_device          4543  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
i2c_core               15279  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_viapro
via_agp                 5044  1 
hid                    61027  1 usbhid
agpgart                23773  3 ttm,drm,via_agp
parport                25487  3 lp,ppdev,parport_pc
snd                    43107  15 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
hwmon                   1085  1 thermal_sys
rtc_cmos                7838  0 
psmouse                40750  0 
button                  3934  0 
shpchp                 27112  0 
rtc_core               12050  1 rtc_cmos
evdev                   6939  10 
rtc_lib                 1522  1 rtc_core
soundcore               4815  1 snd
8139too                16866  0 
mii                     3322  1 8139too
serio_raw               3754  0 
sg                     21214  0 

Kod: Zaznacz cały

lsusb -v

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.33.4-smp ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:10.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts             8
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0503 highspeed power enable connect
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0503 highspeed power enable connect
   Port 8: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 003: ID 054c:01bd Sony Corp. MRW62E Multi-Card Reader/Writer
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x054c Sony Corp.
  idProduct          0x01bd MRW62E Multi-Card Reader/Writer
  bcdDevice            3.95
  iManufacturer           1 Sony
  iProduct                2 Silicon Media R/W
  iSerial                 3 000000089540
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        ** UNRECOGNIZED:  07 21 07 e8 03 fe ff
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 004: ID 043e:70f5 LG Electronics USA, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x043e LG Electronics USA, Inc.
  idProduct          0x70f5 
  bcdDevice            0.00
  iManufacturer          10 HJF Electronic
  iProduct               11 HDD-1 drive
  iSerial                 3 000000003716
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 USB Mass Storage
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              6 MSC Bulk-Only Transfer
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Connection timed out
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.33.4-smp uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0303 lowspeed power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 002: ID 04d9:1603 Holtek Semiconductor, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x04d9 Holtek Semiconductor, Inc.
  idProduct          0x1603 
  bcdDevice            3.10
  iManufacturer           1  
  iProduct                2 USB Keyboard
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      62
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     101
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.33.4-smp uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.33.4-smp uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.33.4-smp uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled
teraz to juz sie całkiem poddalem odpiety czytnik a dalej jest w systemie :/ sprawdzłem kilka razy
Awatar użytkownika
darjerz
Użytkownik
Posty: 1052
Rejestracja: 2004-05-28, 18:26
Lokalizacja: Wrocław

Re: przenośny dysk usb i slackware 13.1

Post autor: darjerz »

Jak to czytnik odpięty a jest w systemie widoczny? restartowałeś udeva kontrolnie?
Bus 001 Device 004: ID 043e:70f5 LG Electronics USA, Inc.

Ciekawe rzeczy : w poprzednim lsusb nie było tego dysku a czy teraz w dmesg jest poprawnie w logach?
Uruchom jeszcze udevadmin monitor i zobacz czy jest jakaś reakcja .
Polecam jednak slacka 64 na ten procek ;-)

Kod: Zaznacz cały

 uname -a
Linux darjerz 2.6.33.4 #3 SMP Wed May 12 23:13:09 CDT 2010 x86_64 Intel(R) Pentium(R) D  CPU 2.66GHz GenuineIntel GNU/Linu
Nie ma rzeczy niemożliwych dla kogoś, kto nie musi ich zrobić sam.
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

witam udev nie ruszałem boje sie :P

a udevadmin monitor uruchomie zobaczymy co ciekawego będzie i się pochwalę wynikami

a co do slacka 64 nie wiem czy mialem coś nie tak z kopią czy co nie chciał dzialać ale to nie ten post :)

a co do tego czytnika to z nim w poprzednich slackach miałem problemy pisałem to tutaj http://forum.slackware.pl/viewtopic.php?f=10&t=22548 i do dziś nie rozwiązałem tego problemu i może to ten problem powoduje to ze dysku nie widzi. Dziś się pokuszę rozebrać kompa na częsci pierwsze i wymontować całkem ten czytnik
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

problem

to napewno sie tak pisze ? udevadmin monitor nie znam linux na tyle zeby tak szaleć z wiedzą tylko tyle co juz przeżylem z nim przez rok :)
Awatar użytkownika
dienet
Moderator
Posty: 2106
Rejestracja: 2007-07-24, 18:58
Lokalizacja: Racibórz/Rybnik
Kontakt:

Re: przenośny dysk usb i slackware 13.1

Post autor: dienet »

cysiek pisze:to napewno sie tak pisze ?

Kod: Zaznacz cały

root@t61:~# udevadm monitor
2x tab nie znasz?
Pozdr0
dienet
[img]http://i164.photobucket.com/albums/u19/slawek15/kotekeo0lq3.jpg[/img]
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

dienet rozumie moderator rozumie pilnujesz porządku a czy ty wszystko tak wiesz pamiętasz i pilnujesz się na każdym kroku? rygor jak juz nawet nie wiem gdzie...

pomijając mały incydent to
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

dienet rozumie moderator rozumie pilnujesz porządku a czy ty wszystko tak wiesz pamiętasz i pilnujesz się na każdym kroku? brak liter na klawiaturze ...
pomijając mały incydent to

niestety tyle pokazało :/

Kod: Zaznacz cały

root@s2:/home/krzys# udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
przez około godzinę tak sobie wisiało tylko że komp nie był używany i z podpiętym dyskiem


Potrenuję z tym slackiem 64 może coś inaczej będzie jak nie to odkopie post
Awatar użytkownika
webster
Użytkownik
Posty: 1269
Rejestracja: 2009-10-06, 11:58
Lokalizacja: Gdańsk
Kontakt:

Re: przenośny dysk usb i slackware 13.1

Post autor: webster »

kolego, ale kiedy Uruchomisz monitor, Powinieneś podpiąć dysk :)
np:

Kod: Zaznacz cały

webster:~ # udevadm monitor
monitor will print the received events for:
UDEV the event which udev sends out after rule processing
UEVENT the kernel uevent

UEVENT[1276727867.795614] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2 (usb)
UEVENT[1276727867.795639] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0 (usb)
UEVENT[1276727867.795651] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7 (scsi)
UEVENT[1276727867.795662] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/scsi_host/host7 (scsi_host)
UEVENT[1276727867.795678] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.7_ep81 (usb_endpoint)
UEVENT[1276727867.795691] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.7_ep02 (usb_endpoint)
UEVENT[1276727867.795703] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/usb_device/usbdev1.7 (usb_device)
UEVENT[1276727867.795753] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/usb_endpoint/usbdev1.7_ep00 (usb_endpoint)
UDEV  [1276727867.803960] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2 (usb)
UDEV  [1276727867.807479] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0 (usb)
UDEV  [1276727867.808136] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7 (scsi)
UDEV  [1276727867.808839] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.7_ep81 (usb_endpoint)
UDEV  [1276727867.810320] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.7_ep02 (usb_endpoint)
UDEV  [1276727867.811035] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/scsi_host/host7 (scsi_host)
UDEV  [1276727867.825066] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/usb_device/usbdev1.7 (usb_device)
UDEV  [1276727867.831620] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/usb_endpoint/usbdev1.7_ep00 (usb_endpoint)
UEVENT[1276727872.800263] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0 (scsi)
UEVENT[1276727872.800282] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0 (scsi)
UEVENT[1276727872.801065] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_disk/7:0:0:0 (scsi_disk)
UDEV  [1276727872.801086] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0 (scsi)
UDEV  [1276727872.806091] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0 (scsi)
UDEV  [1276727872.806959] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_disk/7:0:0:0 (scsi_disk)
UEVENT[1276727873.152277] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/block/sdb (block)
UEVENT[1276727873.152298] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/block/sdb/sdb1 (block)
UEVENT[1276727873.152309] add      /devices/virtual/bdi/8:16 (bdi)
UEVENT[1276727873.152329] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_device/7:0:0:0 (scsi_device)
UEVENT[1276727873.152473] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg1 (scsi_generic)
UDEV  [1276727873.153523] add      /devices/virtual/bdi/8:16 (bdi)
UDEV  [1276727873.154749] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg1 (scsi_generic)
UDEV  [1276727873.160388] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/scsi_device/7:0:0:0 (scsi_device)
UDEV  [1276727873.222835] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/block/sdb (block)
UDEV  [1276727873.310258] add      /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host7/target7:0:0/7:0:0:0/block/sdb/sdb1 (block)
Rozumiesz?
††† Chaos Of The Mirror - Valheru †††
††† I ♥ SlackWare RuLeZ †††

Slackware Poland FaceBook
cysiek
Użytkownik
Posty: 85
Rejestracja: 2009-06-09, 13:40

Re: przenośny dysk usb i slackware 13.1

Post autor: cysiek »

dzięki za info pomyślałem o tym zanim napisałem ze wisi ten monitor
ODPOWIEDZ