Broadcom 4313 i Slack 13.1

Gdy jakieś urządzenie nie chce w Slackware działać...

Moderatorzy: Moderatorzy, Administratorzy

Dragonex
Użytkownik
Posty: 1
Rejestracja: 2008-07-22, 15:32
Lokalizacja: Lubaczów

Broadcom 4313 i Slack 13.1

Post autor: Dragonex »

Mam problem z 13.1 i wyżej wymienioną kartą. Otóż zainstalowałem fwcuttera i firmware do niego. Jądro 2.6.33. Jedyne czym widzę, że to działa to wpis w dmesgu:

Kod: Zaznacz cały

Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
lspci:

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 02)
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
iwconfig:

Kod: Zaznacz cały

lo        no wireless extensions.

eth0      no wireless extensions.
Nie wiem dlaczego mi lspci widzi go jako 4727. Proszę o jakąkolwiek pomoc - męczę się z tym już 3 dni i nie mogę wymęczyć. Z góry dziękuje. Pozdrawiam.
Awatar użytkownika
dienet
Moderator
Posty: 2105
Rejestracja: 2007-07-24, 18:58
Lokalizacja: Racibórz/Rybnik

Re: Broadcom 4313 i Slack 13.1

Post autor: dienet »

Pozdr0
dienet
[img]http://i164.photobucket.com/albums/u19/slawek15/kotekeo0lq3.jpg[/img]
ODPOWIEDZ