Mam problem z interfejsem sieciowym na płycie ASRock 960gm-vgs3. Kontroler ethernet pochodzi od Atherosa: AR8151 ver 2. Slackware 14.1, kernel 3.10.17.
Poniżej listuję to co mi przyszło do głowy a jest z tym związane:
Ifconfig -a:
Kod: Zaznacz cały
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 10.10.10.3 netmask 255.255.255.0 broadcast 10.10.10.255
ether d0:50:99:44:45:68 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 32 bytes 3068 (2.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 32 bytes 3068 (2.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Kod: Zaznacz cały
02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
Subsystem: ASRock Incorporation Device 1083
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at e800 [size=128]
Capabilities: [40] Power Management version 3
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [6c] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-44-45-68-d0-50-99-ff
Kernel driver in use: atl1c
Kernel modules: atl1c
Kod: Zaznacz cały
filename: /lib/modules/3.10.17/kernel/drivers/net/ethernet/atheros/atl1c/atl1c.ko
version: 1.0.1.1-NAPI
license: GPL
description: Qualcom Atheros 100/1000M Ethernet Network Driver
author: Qualcomm Atheros Inc., <nic-devel@qualcomm.com>
author: Jie Yang
srcversion: D7C51AE9EAEA06DE7F10568
alias: pci:v00001969d00001083sv*sd*bc*sc*i*
alias: pci:v00001969d00001073sv*sd*bc*sc*i*
alias: pci:v00001969d00002062sv*sd*bc*sc*i*
alias: pci:v00001969d00002060sv*sd*bc*sc*i*
alias: pci:v00001969d00001062sv*sd*bc*sc*i*
alias: pci:v00001969d00001063sv*sd*bc*sc*i*
depends:
intree: Y
vermagic: 3.10.17 SMP mod_unload
Kod: Zaznacz cały
filename: /lib/modules/3.10.17/kernel/drivers/net/ethernet/atheros/atl1e/atl1e.ko
version: 1.0.0.7-NAPI
license: GPL
description: Atheros 1000M Ethernet Network Driver
author: Atheros Corporation, <xiong.huang@atheros.com>, Jie Yang <jie.yang@atheros.com>
srcversion: BA7C83FB07CD07F2D90B4DC
alias: pci:v00001969d00001066sv*sd*bc*sc*i*
alias: pci:v00001969d00001026sv*sd*bc*sc*i*
depends:
intree: Y
vermagic: 3.10.17 SMP mod_unload
parm: tx_desc_cnt:Transmit description count (array of int)
parm: rx_mem_size:memory size of rx buffer(KB) (array of int)
parm: media_type:MediaType Select (array of int)
parm: int_mod_timer:Interrupt Moderator Timer (array of int)
Kod: Zaznacz cały
[ 14.047331] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Instalacja Slacka jest świeżutka, jeszcze cieplutka...