[Rozw.] Serwer PPTP, nie można się połączyć

Serwery i sieci oparte na Slackware, wszelkiego rodzaju usługi, troubleshooting.

Moderatorzy: Moderatorzy, Administratorzy

lew
Użytkownik
Posty: 18
Rejestracja: 2011-06-15, 08:14

[Rozw.] Serwer PPTP, nie można się połączyć

Post autor: lew »

Próbuję zainstalować serwer PPTP. Podczas próby połączenia w /var/log/syslog mam:

Kod: Zaznacz cały

Oct 10 15:31:25 srv-sch-gw pppd[2478]: LCP: timeout sending Config-Requests
Oct 10 15:31:25 srv-sch-gw pppd[2478]: tcflush failed: Bad file descriptor
Oct 10 15:31:25 srv-sch-gw pptpd[2477]: GRE: read(fd=6,buffer=8058c20,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Oct 10 15:31:25 srv-sch-gw pptpd[2477]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
W /var/log/messages mam:

Kod: Zaznacz cały

Oct 10 15:30:55 srv-sch-gw pptpd[2477]: CTRL: Client 85.198.204.204 control connection started
Oct 10 15:30:55 srv-sch-gw pptpd[2477]: CTRL: Starting call (launching pppd, opening GRE)
Oct 10 15:30:55 srv-sch-gw pppd[2478]: pppd 2.4.3 started by root, uid 0
Oct 10 15:30:55 srv-sch-gw pppd[2478]: Using interface ppp0
Oct 10 15:30:55 srv-sch-gw pppd[2478]: Connect: ppp0 <--> /dev/pts/1
Oct 10 15:31:25 srv-sch-gw pppd[2478]: Connection terminated.
Oct 10 15:31:25 srv-sch-gw pppd[2478]: Using interface ppp0
Oct 10 15:31:25 srv-sch-gw pppd[2478]: Connect: ppp0 <--> /dev/pts/1
Oct 10 15:31:25 srv-sch-gw pppd[2478]: Exit.
Oct 10 15:31:25 srv-sch-gw pptpd[2477]: CTRL: Client 85.198.204.204 control connection finished
Mam plik z opcjami /etc/ppp/options.pptpd:

Kod: Zaznacz cały

###############################################################################
# $Id: options.pptpd,v 1.9 2005/08/02 11:33:32 quozl Exp $
#
# Sample Poptop PPP options file /etc/ppp/options.pptpd
# Options used by PPP when a connection arrives from a client.
# This file is pointed to by /etc/pptpd.conf option keyword.
# Changes are effective on the next connection.  See "man pppd".
#
# You are expected to change this file to suit your system.  As
# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
###############################################################################


# Authentication

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain


# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.)


# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
# {{{
refuse-pap
refuse-chap
refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
#require-chap

# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
require-mppe-128
# }}}

#mppe required
#mppe no40
#mppe no128


# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
# {{{
#-chap
#-chapms
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
#+chapms-v2
# Require MPPE encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
#mppe-40        # enable either 40-bit or 128-bit, not both
#mppe-128
#mppe-stateless
# }}}


# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
ms-dns 8.8.8.8
ms-dns 8.8.8.8

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp


# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
#debug

# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump


# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock

# Disable BSD-Compress compression
nobsdcomp

# Disable Van Jacobson compression
# (needed on some networks with Windows 9x/ME/XP clients, see posting to
# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 )
novj
novjccomp

# turn off logging to stderr, since this may be redirected to pptpd,
# which may trigger a loopback
nologfd

# put plugins here
# (putting them higher up may cause them to sent messages to the pty)
Połączenie się nie zestawia. Ktoś może podpowiedzieć co może być nie tak?
Ostatnio zmieniony 2013-10-15, 08:21 przez lew, łącznie zmieniany 1 raz.
Awatar użytkownika
bojleros
Użytkownik
Posty: 785
Rejestracja: 2005-08-29, 11:12
Lokalizacja: z widokem na familoki :)

Re: Serwer PPTP, nie można się połączyć

Post autor: bojleros »

1. Skasuj znak komentarza w tej linii:

Kod: Zaznacz cały

#debug
Spróbuj uruchomić i zobacz czy logi mówią coś więcej. Rozumiem że masz /etc/ppp/chap-secrets i wpisałeś tam co trzeba ?
Ostatnio miałem pptp na chwilę i z opisu z Archlinuxa działało praktycznie od ręki.

2. Swoją drogą jeżeli planujesz dla tego tunelu jakieś poważniejsze zadania to radzę zrezygnować z pptp na rzecz openvpn lub ipsec.

Pozdrawiam
lew
Użytkownik
Posty: 18
Rejestracja: 2011-06-15, 08:14

Re: Serwer PPTP, nie można się połączyć

Post autor: lew »

Dzięki za odpowiedź. Walczyłem z tym długo, w końcu wkurzyłem się i zrestartowałem serwer i zaczęło działać :mrgreen:
ODPOWIEDZ