[13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis systemu

Instalacja Slackware Linux, problemy i wstępna konfiguracja, aktualizacje do nowszych wersji.

Moderatorzy: Moderatorzy, Administratorzy

jarandy
Użytkownik
Posty: 5
Rejestracja: 2010-06-15, 20:42

[13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis systemu

Post autor: jarandy »

Witam. Mam problem po instalacji z uruchomieniem systemu wtedy, gdy w biosie mam włączony WLAN i Bluethoot.
Podczas ładowania systemu otrzymuję komunikat:

Kod: Zaznacz cały

...
HDA Intel 0000:00:1b.0 PCI INT A -> GSI 17 (level, low) -> IRQ17
b43-pci-bridge 0000:03:00.0 : PCI INT -> GSI 17 (level, low) -> IRQ 17
i systemm wisi....
Jak wyłączę WLAN i Bluetooth w BIOS to slackware 13.1 się załaduje.

Kiedyś (około rok temu) miałem na tym laptopie 13.0 i była zrobilem sobie obsługe WLAN za pomocą NDISWRAPPER, w nowszej dystrybucji jest chyba jakiś konflikt z moim wlanem (Broadcom).

Domyślam się że problem jest z b43-pci-bridge.
Jak można ten problem rozwiązac ?

dienet: używaj znacznika

Kod: Zaznacz cały

[/size]
Awatar użytkownika
dienet
Moderator
Posty: 2105
Rejestracja: 2007-07-24, 18:58
Lokalizacja: Racibórz/Rybnik

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: dienet »

Można wyłączyć ładowanie tego modułu w /etc/rc.d/rc.modules.
Dobrze by było zobaczyć też wynik:

Kod: Zaznacz cały

lspci
Pozdr0
dienet
[img]http://i164.photobucket.com/albums/u19/slawek15/kotekeo0lq3.jpg[/img]
jarandy
Użytkownik
Posty: 5
Rejestracja: 2010-06-15, 20:42

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: jarandy »

Prosze ponizej lspci. Jednak prosze zauwazyc, ze nie bedzie w listingu ponizej urzadzenia powodujacego konflikt, poniewaz aby system ruszyl musze wylaczyc w BIOS laptopa WLAN.

Kod: Zaznacz cały

bash-4.1# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series]
01:00.1 Audio device: ATI Technologies Inc RV710/730
85:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 436c (rev 10)
Wiem ze problem powoduje WLAN laptopa, co zrobic zeby system nie ladowal sterownikow dla karty wifi przy wlaczonym w BIOS WLAN ? Chetnie bym skorzystal nawet z NDISWRAPPER ale jak wlacze WLAN to i tak system sie zawiesi.
Awatar użytkownika
marco70
Moderator
Posty: 1110
Rejestracja: 2006-10-26, 19:03
Lokalizacja: K...l
Kontakt:

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: marco70 »

Poczytaj sobie o pliku /etc/modprobe.d/blacklist ustal moduł który powoduje konflikt i dopisz go do tego pliku.Na stronce Broadcom-a są sterowniki do wifi.
slackware64-15.0
jarandy
Użytkownik
Posty: 5
Rejestracja: 2010-06-15, 20:42

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: jarandy »

marco70 pisze: ustal moduł który powoduje konflikt
Jak to ustalic ? Jakas podpowiedz ? Dopisalem "blacklist b43-pci-bridge" ale po wlaczeniu WLAN i tak sie system zawiesil :sad:
Jak wylacze WLAN w BIOS to przerwanie nr 17 zajmuje

Kod: Zaznacz cały

ACPI: Fan [FAN4] (off)
ACPI: Fan [FAN5] (off)
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 32 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
Adding 4883752k swap on /dev/sda2.  Priority:-1 extents:1 across:4883752k 
fuse init (API version 7.13)
ppdev: user-space parallel port driver
Ale to pewnie nie ma znaczenia. W pierwszym moim poscie widac ze oba urzadzenia (HDA intel i b43) wchodza na to samo przerwanie - moze to powoduje zawis systemu. Problem chyba w tym ze ja nie wiem jak sie nazywa modul kernela ktory ma sterowniki wywolujace przy starcie systemu b43-pci-bridge
Awatar użytkownika
marco70
Moderator
Posty: 1110
Rejestracja: 2006-10-26, 19:03
Lokalizacja: K...l
Kontakt:

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: marco70 »

Może dopisz

Kod: Zaznacz cały

blacklist b43
a z bluetooth bez wifi startuje ?
slackware64-15.0
jarandy
Użytkownik
Posty: 5
Rejestracja: 2010-06-15, 20:42

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: jarandy »

ikona bluetooth sie pojawia w pasku ma czerwoy krzyzyk jak na nia klikne to jest okno z informacja:
"Connection to BlueZ failed. Bluez daemon is not running, blueman-manager cannot continue."
Z tego co wiem to broadcom to modul zintegrowany wlan i bluetooht w jednym.
Dopisanie "blacklist b43" nie pomoglo.
Wydaje mi sie ze rozwiazaniem problemu jest podanie w blacklist prawidlowej nazwy modulu sterownika broadcom wlaczonego w kernel. Tylko jak poznac nazwe tego modulu?
Awatar użytkownika
marco70
Moderator
Posty: 1110
Rejestracja: 2006-10-26, 19:03
Lokalizacja: K...l
Kontakt:

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: marco70 »

W Slackware-13.1 są 2 moduły b43.ko i b43legacy.ko na stronce hp są sterowniki wifi do tego lapka ale pod Suse. Może to moduł Bluetooth powoduje zwis tylko jaki ?
slackware64-15.0
jarandy
Użytkownik
Posty: 5
Rejestracja: 2010-06-15, 20:42

Re: [13.3 WLAN] HP Probook 4710s - "b43-pci-bridge" zwis sys

Post autor: jarandy »

do blacklist.conf dodalem:

Kod: Zaznacz cały

blacklist b43.ko
blacklist b43legacy.ko
teraz czesc odnosnie broadcom w blacklist wyglada tak:

Kod: Zaznacz cały

# Deprecated BCM4318 driver.
blacklist bcm43xx
blacklist b43.ko
blacklist b43legacy.ko
(bcm43xx bylo juz po instalacji systemu)

POMOGLO :-)
System ruszyl, wykryl karte 4312, zaladowal jakis driver dla niej (dlaczego to zrobil jezeli mial sterowniki w blacklist?)

listing przy ladowaniu systemu wyglada tak:

Kod: Zaznacz cały

bash-4.1# dmesg
0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0x98400000-0x984fffff]
pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [mem 0x98300000-0x983fffff]
pci 0000:03:00.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [mem 0x98200000-0x982fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-44]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0x94200000-0x981fffff]
pci 0000:00:1c.4: PCI bridge to [bus 45-85]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0x90200000-0x941fffff]
pci 0000:86:00.0: reg 10: [mem 0x90100000-0x90103fff 64bit]
pci 0000:86:00.0: reg 18: [io  0x2000-0x20ff]
pci 0000:86:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:86:00.0: supports D1 D2
pci 0000:86:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:86:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 86-86]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0x90100000-0x901fffff]
pci 0000:00:1e.0: PCI bridge to [bus 87-87] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1   1578 MB/s
raid6: int64x2   2144 MB/s
raid6: int64x4   1496 MB/s
raid6: int64x8   1347 MB/s
raid6: sse2x1    3300 MB/s
raid6: sse2x2    3550 MB/s
raid6: sse2x4    5960 MB/s
raid6: using algorithm sse2x4 (5960 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [io  0xfe00-0xfe0f] has been reserved
system 00:04: [io  0xfe80-0xfe8f] has been reserved
system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:07: [io  0x0200-0x027f] has been reserved
system 00:07: [io  0x1000-0x1003] has been reserved
system 00:07: [io  0x1010-0x101f] has been reserved
system 00:07: [io  0xffff] has been reserved
system 00:07: [io  0x0400-0x047f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [io  0xef80-0xef9f] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:86:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x98600000-0x987fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0x98800000-0x989fffff 64bit pref]
pci 0000:00:1c.2: BAR 9: assigned [mem 0x98a00000-0x98bfffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0x98e00000-0x98ffffff pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x9000-0x9fff]
pci 0000:00:1c.1: BAR 7: assigned [io  0xa000-0xafff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x98420000-0x9843ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:01.0:   bridge window [mem 0x98400000-0x984fffff]
pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.0:   bridge window [mem 0x98300000-0x983fffff]
pci 0000:00:1c.0:   bridge window [mem 0x98600000-0x987fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.1:   bridge window [mem 0x98200000-0x982fffff]
pci 0000:00:1c.1:   bridge window [mem 0x98800000-0x989fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-44]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
pci 0000:00:1c.2:   bridge window [mem 0x94200000-0x981fffff]
pci 0000:00:1c.2:   bridge window [mem 0x98a00000-0x98bfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 45-85]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0x90200000-0x941fffff]
pci 0000:00:1c.4:   bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:86:00.0: BAR 6: assigned [mem 0x98e00000-0x98e1ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 86-86]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0x90100000-0x901fffff]
pci 0000:00:1c.5:   bridge window [mem 0x98e00000-0x98ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 87-87]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0x98400000-0x984fffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0x98300000-0x983fffff]
pci_bus 0000:02: resource 2 [mem 0x98600000-0x987fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0x98200000-0x982fffff]
pci_bus 0000:03: resource 2 [mem 0x98800000-0x989fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x5000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0x94200000-0x981fffff]
pci_bus 0000:04: resource 2 [mem 0x98a00000-0x98bfffff 64bit pref]
pci_bus 0000:45: resource 0 [io  0x3000-0x4fff]
pci_bus 0000:45: resource 1 [mem 0x90200000-0x941fffff]
pci_bus 0000:45: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
pci_bus 0000:86: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:86: resource 1 [mem 0x90100000-0x901fffff]
pci_bus 0000:86: resource 2 [mem 0x98e00000-0x98ffffff pref]
pci_bus 0000:87: resource 1 [mem 0x90000000-0x900fffff]
pci_bus 0000:87: resource 3 [io  0x0000-0xffff]
pci_bus 0000:87: resource 4 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Intel AES-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1280529556.419:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM (built May 12 2010 23:08:15) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built May 12 2010 23:09:03) installed
msgmni has been set to 3982
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010700000, using 1536k, total 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=18
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver: 8.03.01-k10
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.7
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
mpt2sas version 03.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0x98504000 port 0x98504100 irq 30
ata2: SATA max UDMA/133 abar m2048@0x98504000 port 0x98504180 irq 30
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0x98504000 port 0x98504380 irq 30
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.13
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98504c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98504800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00008080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.4 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40J, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb usb6: Product: UHCI Host Controller
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb usb6: Manufacturer: Linux 2.6.33.4 uhci_hcd
ata1.00: configured for UDMA/100
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.33.4 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
 sda:
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.33.4 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
usb 1-5: new high speed USB device using ehci_hcd and address 2
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
usb 1-5: New USB device found, idVendor=04f2, idProduct=b159
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-5: Product: CNF8243
usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-5: SerialNumber: SN0001
 sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 8-1: new low speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633M  0200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 8-1: New USB device found, idVendor=09da, idProduct=000a
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: PS/2+USB Mouse
usb 8-1: Manufacturer: A4Tech
ata6: SATA link down (SStatus 0 SControl 300)
registered taskstats version 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 764k freed
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2004k freed
Freeing unused kernel memory: 1260k freed
udev: starting version 153
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: Battery Slot [BAT0] (battery present)
lis3lv02d: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
Registered led device: hp::hddprotect
lis3lv02d driver loaded.
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Linux video capture interface: v2.00
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
Linux agpgart interface v0.103
sky2 driver version 1.26
sky2 0000:86:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:86:00.0: setting latency timer to 64
sky2 0000:86:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:86:00.0: irq 31 for MSI/MSI-X
sky2 eth0: addr 00:25:b3:5c:5b:34
input: CNF8243 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input7
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.2-1/input0
ACPI: WMI: Mapper loaded
input: HP WMI hotkeys as /devices/virtual/input/input8
ACPI: SSDT 000000007fcc6c18 002B7 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:03:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
ACPI: SSDT 000000007fcc4618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [GFXZ] (70 C)
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
acpi device:02: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
ACPI: Video Device [DGFX] (multi-head: yes  rom: no  post: no)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ACPI: SSDT 000000007fcc5e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
ACPI: SSDT 000000007fcc6f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
cfg80211: Using static regulatory domain info
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [DTSZ] (52 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [CPUZ] (48 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [SKNZ] (47 C)
cfg80211: Regulatory domain: 00
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (28 C)
thermal LNXTHERM:06: registered as thermal_zone5
ACPI: Thermal Zone [FDTZ] (45 C)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
ACPI: Fan [FAN6] (off)
ACPI: Fan [FAN7] (off)
ACPI: Fan [FAN8] (off)
ACPI: Fan [FAN9] (off)
ACPI: Fan [FANA] (off)
ACPI: Fan [FANB] (off)
ACPI: Fan [FANG] (off)
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Fan [FAN5] (off)
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
b43-phy0: Broadcom 4312 WLAN found (core revision 15)
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 33 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
Adding 4883752k swap on /dev/sda2.  Priority:-1 extents:1 across:4883752k 
fuse init (API version 7.13)
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading RV710 CP Microcode
platform r600_cp.0: firmware: requesting radeon/RV710_pfp.bin
platform r600_cp.0: firmware: requesting radeon/RV710_me.bin
[drm] Resetting GPU
[drm] writeback test succeeded in 1 usecs
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
bash-4.1# 
Jutro powalcze z uruchomieniem WLAN, ostatnio w 13.0 uzywalem ndiswrapper ale nie dzialal mi na slackware64 bit, a taki teraz zainstalowalem, ale ponoc na stronie Broadcom sa juz sterowniki dla linuxa na WLAN.

Dziekuje bardzo za pomoc w uruchomieniu systemu. Pozdrawiam.
ODPOWIEDZ