Strona 1 z 2

Proces X - duże obciążenia CPU

: 2011-05-18, 17:42
autor: addos
Slackware 13.37 + KDE 4.5.5
CPU i RAM są dosyć mocne: Intel C2D 3GHz E8400 + 2GB RAM

Jak sprawdzić co dokładnie obciążania mi jeden z rdzeni bardzo często na ok. 40-50% ?
Nie wiem co jest tego powodem.
Czasami system reaguje jakbym miał 128MB RAMU a czasami działa normalnie.
Gdy chcę wywołać krunnera albo kliknąc w jakiś plazmoid na pulpicie to czasem jest reakcja od razu a czasami czeka się np. 20 sekund.

Mam na pulpicie plazmoid z informacją odnośnie zajętości i wolnego miejsca na poszczególnych partycjach oraz info z pogodą.
Gdy klikam w któryś z nich żeby np. zmienić konfigurację to jest właśnie tak jak powyżej opisałem.
Nic więcej na pulpicie z plazmoidów nie mam i nie wydaje mi się, żeby liczba 2 była jakąś dużą ilością :)

Jakieś sugestie?
Jak sprawdzić co jest składową tego procesu X oraz co z tej składowej mi tak spowalnia sprzęt?

Re: Proces X - duże obciążenia CPU

: 2011-05-18, 18:10
autor: dienet

Kod: Zaznacz cały

ps aux
top
152 posty i nie zna takich poleceń :neutral: ? Ah potomków się chyba sprawdza dodając f:

Kod: Zaznacz cały

ps auxf
nie wiem czy w top to też jest (poczytaj man).

Re: Proces X - duże obciążenia CPU

: 2011-05-18, 19:38
autor: addos
Dzięki dienet... znam te polecenia ale nic z nich nie potrafię wyczytać.

Polecenie top wykazuje tylko sam proces X bez rozróżnienia w szczegółach co tam jest w środku więc nic nie odczytam ciekawego.

Natomiast polecenie:

ps auxf

Kod: Zaznacz cały

USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         2  0.0  0.0      0     0 ?        S    May17   0:00 [kthreadd]
root         3  0.0  0.0      0     0 ?        S    May17   0:03  \_ [ksoftirqd/0]
root         6  0.0  0.0      0     0 ?        S    May17   0:00  \_ [migration/0]
root         7  0.0  0.0      0     0 ?        S    May17   0:00  \_ [migration/1]
root         9  0.0  0.0      0     0 ?        S    May17   0:05  \_ [ksoftirqd/1]
root        11  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [cpuset]
root        12  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [khelper]
root        16  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [netns]
root       279  0.0  0.0      0     0 ?        S    May17   0:00  \_ [sync_supers]
root       281  0.0  0.0      0     0 ?        S    May17   0:00  \_ [bdi-default]
root       283  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kblockd]
root       285  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kacpid]
root       286  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kacpi_notify]
root       287  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kacpi_hotplug]
root       400  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ata_sff]
root       408  0.0  0.0      0     0 ?        S    May17   0:00  \_ [khubd]
root       411  0.0  0.0      0     0 ?        S    May17   0:00  \_ [kseriod]
root       414  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [md]
root       518  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [rpciod]
root       545  0.0  0.0      0     0 ?        S    May17   0:00  \_ [khungtaskd]
root       546  0.0  0.0      0     0 ?        S    May17   0:51  \_ [kswapd0]
root       613  0.0  0.0      0     0 ?        S    May17   0:00  \_ [fsnotify_mark]
root       615  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [aio]
root       638  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [nfsiod]
root       649  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jfsIO]
root       650  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jfsCommit]
root       651  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jfsCommit]
root       652  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jfsSync]
root       659  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [xfs_mru_cache]
root       660  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [xfslogd]
root       661  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [xfsdatad]
root       662  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [xfsconvertd]
root       665  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ocfs2_wq]
root       666  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [o2quot]
root       669  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [user_dlm]
root       675  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [glock_workqueue]
root       676  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [delete_workqueu]
root       681  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [gfs_recovery]
root       683  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [crypto]
root       724  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kthrotld]
root       866  0.0  0.0      0     0 ?        S    May17   0:00  \_ [cciss_scan]
root       871  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [scsi_tgtd]
root       885  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [iscsi_eh]
root       892  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [fc_exch_workque]
root       893  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [fc_rport_eq]
root       894  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [fcoethread/0]
root       895  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [fcoethread/1]
root       898  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [fnic_event_wq]
root       988  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_2]
root       991  0.0  0.0      0     0 ?        S    May17   0:06  \_ [scsi_eh_3]
root       994  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_4]
root       997  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_5]
root      1000  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_6]
root      1003  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_7]
root      1009  0.0  0.0      0     0 ?        S    May17   0:00  \_ [kworker/u:5]
root      1010  0.0  0.0      0     0 ?        S    May17   0:00  \_ [kworker/u:6]
root      1130  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [exec-osm]
root      1136  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [block-osm]
root      1212  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [kstriped]
root      1215  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ksnapd]
root      1219  0.0  0.0      0     0 ?        S    May17   0:00  \_ [scsi_eh_10]
root      1220  0.0  0.0      0     0 ?        S    May17   0:13  \_ [usb-storage]
root      1226  0.0  0.0      0     0 ?        SN   May17   0:00  \_ [speakup]
root      1232  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jbd2/sda1-8]
root      1233  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ext4-dio-unwrit]
root      1440  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [usbhid_resumer]
root      1553  0.0  0.0      0     0 ?        S    May17   0:00  \_ [cx88 tvaudio]
root      1605  0.0  0.0      0     0 ?        S    May17   0:19  \_ [flush-8:0]
root      1655  0.0  0.0      0     0 ?        S    May17   0:01  \_ [jbd2/sda6-8]
root      1656  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ext4-dio-unwrit]
root      1657  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jbd2/sda2-8]
root      1658  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ext4-dio-unwrit]
root      1659  0.0  0.0      0     0 ?        S    May17   0:00  \_ [jbd2/sda3-8]
root      1660  0.0  0.0      0     0 ?        S<   May17   0:00  \_ [ext4-dio-unwrit]
root      1661  0.0  0.0      0     0 ?        S    May17   0:01  \_ [xfsbufd/sda7]
root      1662  0.0  0.0      0     0 ?        S    May17   0:00  \_ [xfsaild/sda7]
root      1663  0.0  0.0      0     0 ?        S    May17   0:00  \_ [xfssyncd/sda7]
root      1664  0.0  0.0      0     0 ?        S    May17   0:02  \_ [xfsbufd/sda8]
root      1665  0.0  0.0      0     0 ?        S    May17   0:00  \_ [xfsaild/sda8]
root      1666  0.0  0.0      0     0 ?        S    May17   0:00  \_ [xfssyncd/sda8]
root      6819  0.0  0.0      0     0 ?        S    16:13   0:00  \_ [kworker/1:0]
root      6845  0.0  0.0      0     0 ?        S    16:20   0:00  \_ [kworker/0:1]
root      6846  0.0  0.0      0     0 ?        S    16:23   0:01  \_ [kworker/1:2]
root      6852  0.0  0.0      0     0 ?        S    16:26   0:00  \_ [kworker/0:0]
root         1  0.0  0.0    824    76 ?        Ss   May17   0:01 init [4]  
root      1266  0.0  0.0   2764  1120 ?        S<s  May17   0:00 /sbin/udevd --daemon
root      6552  0.0  0.0   2760   956 ?        S<   14:13   0:00  \_ /sbin/udevd --daemon
root      6553  0.0  0.0   2760   924 ?        S<   14:13   0:00  \_ /sbin/udevd --daemon
root      1696  0.0  0.0   1904   444 ?        Ss   May17   0:00 /usr/sbin/syslogd
root      1700  0.0  0.0   1852   344 ?        Ss   May17   0:00 /usr/sbin/klogd -c 3 -x
root      1775  0.0  0.0   2040   364 ?        Ss   May17   0:00 /sbin/dhcpcd -t 10 eth0
root      1849  0.0  0.0   1892   448 ?        Ss   May17   0:00 /usr/sbin/inetd
root      1856  0.0  0.0   1860   488 ?        Ss   May17   0:00 /usr/sbin/acpid
81        1868  0.0  0.0   3156  1360 ?        Ss   May17   0:01 /usr/bin/dbus-daemon --system
82        1940  0.0  0.1  15836  2080 ?        Ssl  May17   0:01 /usr/sbin/hald --daemon=yes
root      2013  0.0  0.0   3672   984 ?        S    May17   0:00  \_ hald-runner
root      2042  0.0  0.0   3768   744 ?        S    May17   0:00      \_ hald-addon-input: Listening on /dev/input/event1 /dev/input/event0 /dev/input/event6 /dev/input/event5 /dev/input/event3 /dev/input/event4
root      2058  0.0  0.0   3772   700 ?        S    May17   0:02      \_ hald-addon-storage: polling /dev/sdb (every 2 sec)
root      2059  0.0  0.0   3772   696 ?        S    May17   0:02      \_ hald-addon-storage: polling /dev/sdc (every 2 sec)
root      2060  0.0  0.0   3772   696 ?        S    May17   0:02      \_ hald-addon-storage: polling /dev/sdd (every 2 sec)
root      2061  0.0  0.0   3772   700 ?        S    May17   0:02      \_ hald-addon-storage: polling /dev/sde (every 2 sec)
root      2070  0.0  0.0   3772   700 ?        S    May17   0:06      \_ hald-addon-storage: polling /dev/sr0 (every 2 sec)
82        2072  0.0  0.0   3576   880 ?        S    May17   0:00      \_ hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root      1942  0.0  0.0  26760  1912 ?        Sl   May17   0:00 /usr/sbin/console-kit-daemon --no-daemon
root      2010  0.0  0.1  23372  3056 ?        Sl   May17   0:00 /usr/libexec/polkitd
root      2097  0.0  0.0   5752  1148 ?        Ss   May17   0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf
root      2105  0.0  0.0   2080   588 ?        Ss   May17   0:00 /usr/sbin/crond -l notice
daemon    2107  0.0  0.0   2072   308 ?        Ss   May17   0:00 /usr/sbin/atd -b 15 -l 1
root      2138  0.0  0.0   2068   328 ?        Ss   May17   0:01 /usr/sbin/gpm -m /dev/mouse -t imps2
root      2140  0.0  0.0   1852   460 tty1     Ss+  May17   0:00 /sbin/agetty 38400 tty1 linux
root      2141  0.0  0.0   1852   460 tty2     Ss+  May17   0:00 /sbin/agetty 38400 tty2 linux
root      2142  0.0  0.0   1852   456 tty3     Ss+  May17   0:00 /sbin/agetty 38400 tty3 linux
root      2143  0.0  0.0   1852   460 tty4     Ss+  May17   0:00 /sbin/agetty 38400 tty4 linux
root      2144  0.0  0.0   1852   460 tty5     Ss+  May17   0:00 /sbin/agetty 38400 tty5 linux
root      2145  0.0  0.0   1852   460 tty6     Ss+  May17   0:00 /sbin/agetty 38400 tty6 linux
root      2146  0.0  0.0   3964   756 ?        Ss   May17   0:00 /usr/bin/kdm -nodaemon
root      2149 15.8  3.2  86784 67436 tty7     Rs+  May17 318:58  \_ /usr/bin/X -br -novtswitch -quiet :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-WOiulb
root      2153  0.0  0.0   4284  1256 ?        S    May17   0:00  \_ -:0                   
adam      2168  0.0  0.0   3936  1020 ?        Ss   May17   0:00      \_ /bin/sh /usr/bin/startkde
adam      2263  0.0  0.0   2628   316 ?        S    May17   0:00          \_ kwrapper4 ksmserver
adam      2218  0.0  0.0   4292   596 ?        S    May17   0:00 dbus-launch --sh-syntax --exit-with-session
adam      2219  0.0  0.0   4312  1672 ?        Ss   May17   1:26 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root      2226  0.0  0.0   1696    52 ?        S    May17   0:00 /usr/lib/kde4/libexec/start_kdeinit +kcminit_startup
adam      2227  0.0  1.2  91936 25408 ?        Ss   May17   0:00 kdeinit4: kdeinit4 Running...                  
adam      2228  0.0  1.3  94992 26824 ?        S    May17   0:00  \_ kdeinit4: klauncher [kdeinit] --fd=9           
adam      2268  0.0  1.4 138812 29204 ?        Sl   May17   0:00  \_ kdeinit4: ksmserver [kdeinit]                  
adam      2281  3.6  3.6 289216 74540 ?        Sl   May17  72:57  |   \_ kwin -session 10143e3c2d5000130502893300000029140000_1305621826_375649
adam      7161  0.0  1.4  93548 28884 ?        S    18:47   0:00  \_ kdeinit4: kio_http_cache_cleaner [kdeinit]     
adam      7167  0.0  1.8 1285016 37352 ?       S    18:48   0:01  \_ /usr/bin/krusader -caption Krusader -icon krusader_user.png
adam      2230  0.0  1.5 148576 31616 ?        Sl   May17   0:09 kdeinit4: kded4 [kdeinit]                      
adam      2232  0.0  0.0   4072  1096 ?        S    May17   0:00 /usr/libexec/gam_server
adam      2247  0.0  1.4 129276 29900 ?        S    May17   0:00 kdeinit4: kglobalaccel [kdeinit]               
adam      2309  0.0  1.1 175476 24516 ?        Sl   May17   0:04 /usr/bin/knotify4
adam      2311  3.0  3.7 313552 77408 ?        Sl   May17  60:25 kdeinit4: plasma-desktop [kdeinit]             
adam      7156  0.0  0.0   3016  1228 ?        S    18:44   0:03  \_ ksysguardd
adam      2316  0.0  0.5  74836 10992 ?        S    May17   0:10 /usr/bin/kuiserver
adam      2322  0.0  1.4 128868 28912 ?        S    May17   0:01 kdeinit4: kaccess [kdeinit]                    
adam      2332  0.0  1.2  93820 26484 ?        S    May17   0:00 kdeinit4: nepomukserver [kdeinit] -session 10143e3c2d5000130562032900000022880005_1305621826_325761
adam      2340  0.0  0.8  95952 17696 ?        Sl   May17   0:00 /usr/lib/kde4/libexec/polkit-kde-authentication-agent-1
adam      2346  0.0  1.4 130752 30540 ?        S    May17   0:00 kdeinit4: klipper [kdeinit]                    
adam      2354  0.1  0.7  79072 15508 ?        S    May17   2:57 /usr/bin/knemo
adam      2391  0.0  0.1  15112  3048 ?        S    May17   0:00 /usr/lib/kde4/libexec/kdesud
root      2405  0.0  0.0   3772   572 ?        S    May17   0:00 dbus-launch --autolaunch f92e58c1f6ef73e70e79b6b800000019 --binary-syntax --close-stderr
root      2406  0.0  0.0   2772   816 ?        Ss   May17   0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root      2408  0.0  0.0   3420   920 ?        S    May17   0:00 /usr/libexec/gam_server
root      2411  0.0  0.2  31024  5976 ?        Ss   May17   0:00 kdeinit4: kdeinit4 Running...
root      2413  0.0  0.3  40616  7604 ?        S    May17   0:00  \_ kdeinit4: klauncher [kdeinit] --fd=8
root      2416  0.0  0.5  78208 10764 ?        S    May17   0:01 kdeinit4: kded4 [kdeinit]  
root      2433  0.0  1.0 177784 22160 ?        Sl   May17   0:04 /usr/bin/knotify4
root      2457  0.0  0.4  73972 10220 ?        S    May17   0:00 kdeinit4: kuiserver [kdeinit]
adam      2537  0.0  1.6 216200 34504 ?        S    May17   0:04 kdeinit4: kmix [kdeinit] -caption KMix -icon kmix
adam      7120  0.1  2.4 243212 49808 ?        Sl   18:35   0:07 kdeinit4: krunner [kdeinit] --nocrashhandler   
adam      7267  1.3  1.5 127008 30856 ?        Sl   20:09   0:04 konsole -e /bin/bash -l
adam      7269  0.0  0.0   4256  2024 pts/1    Ss   20:09   0:00  \_ /bin/bash -l
adam      7310  0.0  0.0   3688  1312 pts/1    R+   20:14   0:00      \_ ps auxf
Może podpowiesz co jest przyczyną wysokiego obciążenia CPU ?

Na potrzeby powyższego wyniku polecenia ps auxf wyłączyłem wszystko co mogło działać w tle: żadnych torrentów, przeglądarek www czy komunikatorów....słowem nic nie działało a i tak proces o nazwie X zabierał ok. 16% CPU ... coś jest nie tak ale nie wiem co.

PS. Co zrobić, żeby dany tekst był w formie: zwiń / rozwiń zamiast zabierać kilka stron w postaci już rozwiniętej?

Re: Proces X - duże obciążenia CPU

: 2011-05-18, 20:00
autor: alekow
U mnie proces "X" zajmuje w czasie normalnej, niezbyt intensywnej pracy, 20-35 procent. Nie przeszkadza to w płynnym działaniu systemu. Pamiętam, że nie byłem zadowolony z działania kde z domyślnym menadżerem okien. Po zmianie na compiza jest lepiej.

Re: Proces X - duże obciążenia CPU

: 2011-05-18, 20:36
autor: addos
Czy teraz gdy masz Compiza to jest właśnie 20-35% obciążenia CPU czy pisałeś o momencie gdy miałeś jeszcze KWin?

A jak się sprawuje Compiz? W której wersji?
Czy są jakieś momenty, że trzeba go wyłączać gdy np. chcesz obejrzeć film lub zagrać w jakąś grę przez Wine (jeśli grasz) ?

Re: Proces X - duże obciążenia CPU

: 2011-05-18, 22:13
autor: alekow
addos pisze:Czy teraz gdy masz Compiza to jest właśnie 20-35% obciążenia CPU czy pisałeś o momencie gdy miałeś jeszcze KWin?
Tak, to jest teraz, z compizem,
addos pisze:A jak się sprawuje Compiz? W której wersji?
Czy są jakieś momenty, że trzeba go wyłączać gdy np. chcesz obejrzeć film lub zagrać w jakąś grę przez Wine (jeśli grasz) ?
Nic z tych rzeczy - żadnego problemu z filmami, a oglądam ich sporo. W gry gram rzadko, ale cywilizacja IV działała bez problemu. Compiz w wersji ze slackware-13.37.
Oprócz tego mam zainstalowane:

Kod: Zaznacz cały

ccsm-0.8.4-i486-1_SBo.txz
compiz-bcop-0.8.4-i486-1_SBo.txz
compiz-plugins-extra-0.8.6-i486-1_SBo.txz
compiz-plugins-main-0.8.6-i486-1_SBo.txz
compizconfig-backend-kconfig4-0.8.4-i486-1_SBo.tgz
compizconfig-python-0.8.4-i486-1_SBo.txz
libcompizconfig-0.8.4-i486-1_SBo.txz
protobuf-2.3.0-i486-2_SBo.txz
ze slackbuilds.org (kompilowałem jeszcze jak używałem starszego compiza - pewnie tym co jest w 13.1 - ale po upgradzie działało więc zostawiłem)
Jeden problem jaki miałem to wywalanie się compiza na starcie kde - coś się gryzło chyba pomiędzy ustawieniami kde i ccsm, ale nie pamiętam co. Teraz działa ok.

----------------------------------------------------------------------------------------------------------------------------------------------------
EDIT:

Przypomniałem sobie że oprócz zmiany menadżera okien dla poprawy szybkości działania wyłączyłem jeszcze indeksowanie plików - to jest jakaś masakra - strasznie spowalniało system momentami.

Re: Proces X - duże obciążenia CPU

: 2011-05-19, 15:02
autor: addos
Usunąłem wszystkie plazmoidy z pulpitu oraz z paska a następnie po kolei testowałem i sprawdzałem, czy któryś z nich nie jest za to odpowiedzialny.

Poza jednym (analiza ruchu LAN) to wszystko jest w miarę OK, tzn. najczęściej ok. 4-5% CPU dla procesu X.

Natomiast jeżeli zacznę szybko ruszać myszką np. przez 30 sekund będę kreślił kółka albo literki "Z" to sytuacja wygląda tak:
  • jeżeli kursor myszki lata po samym oknie Aktywność systemu (Ctrl+Esc) to max 8% CPU dla procesu X
    jeżeli będę ruszał nim po całym ekranie czyli poza oraz po oknie Aktywność systemu (Ctrl+Esc) to max do 35% CPU dla procesu X
Trochę to jest dziwne ale już lepiej niż przedtem... tym bardziej, że testy wykonuję gdy działają:
  • Opera, KTorrent, Skype oraz są włączone te plazmoidy na pulpicie i pasku.
PS. Masz może sposób na podgląd w czasie rzeczywistym obciążenia łącza LAN ale nie na pulpicie a na pasku?
Chodzi mi o liczby a nie o wykres.

Re: Proces X - duże obciążenia CPU

: 2011-05-19, 17:26
autor: joachim726
addos:Może nie jest to odpowiedź bezpośrednio na temat, ale OpenBox (i ogólnie wszystkie pochodne BlackBox'a) zajmóją mniej zasobów niż KDE... (do tego polecam emulator terminala yaqake (chyba tak się pisze))

Re: Proces X - duże obciążenia CPU

: 2011-05-19, 19:46
autor: joi
jaka karta graficzna? jaki sterownik? jest coś ciekawego w X.org.log / dmesg? (wrzuć gdzieś i daj linka)

Re: Proces X - duże obciążenia CPU

: 2011-05-19, 21:28
autor: addos
Najważniejsze parametry komputera:

Kod: Zaznacz cały

CPU Intel C2D E8400 3GHz
RAM 2GB DDR2
VGA Nvidia GF 9600GT 512MB DDR3
HDD 1TB, 7200 obr/min, 32MB cache, SATA2
Oprogramowanie:

Kod: Zaznacz cały

Slackware 13.37 (32-bit) + KDE 4.5.5
System plików dla / to ext4
Sterownik Nvidia 270.41.06
Plik /var/log/dmesg:

Kod: Zaznacz cały

idge window [io  0xd000-0xdfff]
[    0.348460] pci 0000:00:06.0:   bridge window [mem disabled]
[    0.348464] pci 0000:00:06.0:   bridge window [mem pref disabled]
[    0.348468] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[    0.348472] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.348477] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
[    0.348482] pci 0000:00:1c.0:   bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.348489] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.348492] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.348497] pci 0000:00:1c.5:   bridge window [mem 0xfaf00000-0xfaffffff]
[    0.348502] pci 0000:00:1c.5:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.348509] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.348512] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.348517] pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfebfffff]
[    0.348522] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.348532] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.348537] pci 0000:00:01.0: setting latency timer to 64
[    0.348540] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.348544] pci 0000:00:06.0: setting latency timer to 64
[    0.348548] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.348555] pci 0000:02:00.0: setting latency timer to 64
[    0.348560] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.348565] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.348569] pci 0000:00:1c.0: setting latency timer to 64
[    0.348574] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.348578] pci 0000:00:1c.5: setting latency timer to 64
[    0.348583] pci 0000:00:1e.0: setting latency timer to 64
[    0.348585] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.348587] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.348589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.348591] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.348592] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.348594] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.348596] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.348598] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xfaefffff]
[    0.348600] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.348601] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.348603] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.348605] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.348606] pci_bus 0000:05: resource 1 [mem 0x80000000-0x803fffff]
[    0.348608] pci_bus 0000:05: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.348610] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.348612] pci_bus 0000:04: resource 1 [mem 0xfaf00000-0xfaffffff]
[    0.348614] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.348615] pci_bus 0000:06: resource 1 [mem 0xfb000000-0xfebfffff]
[    0.348617] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.348619] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.348620] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.348622] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.348624] pci_bus 0000:06: resource 8 [mem 0x80000000-0xdfffffff]
[    0.348625] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xffffffff]
[    0.348638] NET: Registered protocol family 2
[    0.348664] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.348725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.349002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.349111] TCP: Hash tables configured (established 131072 bind 65536)
[    0.349114] TCP reno registered
[    0.349117] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.349124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.349169] NET: Registered protocol family 1
[    0.349204] RPC: Registered udp transport module.
[    0.349208] RPC: Registered tcp transport module.
[    0.349211] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.349329] pci 0000:01:00.0: Boot video device
[    0.349344] PCI: CLS 32 bytes, default 64
[    0.349884] audit: initializing netlink socket (disabled)
[    0.349892] type=2000 audit(1305629071.348:1): initialized
[    0.349993] highmem bounce pool size: 64 pages
[    0.352142] VFS: Disk quotas dquot_6.5.2
[    0.352192] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.352357] DLM (built Apr  9 2011 23:32:52) installed
[    0.353101] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.353247] NTFS driver 2.1.29 [Flags: R/W].
[    0.353334] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.353469] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.355144] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.355520] SGI XFS Quota Management subsystem
[    0.355527] OCFS2 1.5.0
[    0.355643] ocfs2: Registered cluster interface o2cb
[    0.355696] ocfs2: Registered cluster interface user
[    0.355699] OCFS2 DLMFS 1.5.0
[    0.355748] OCFS2 User DLM kernel interface loaded
[    0.355751] OCFS2 Node Manager 1.5.0
[    0.355834] OCFS2 DLM 1.5.0
[    0.356053] Btrfs loaded
[    0.356298] GFS2 (built Apr  9 2011 23:33:12) installed
[    0.356304] msgmni has been set to 1691
[    0.356794] async_tx: api initialized (async)
[    0.356830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.356846] io scheduler noop registered
[    0.356849] io scheduler deadline registered
[    0.356864] io scheduler cfq registered (default)
[    0.357070] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.357343] vesafb: framebuffer at 0xf7000000, mapped to 0xf8580000, using 3072k, total 14336k
[    0.357348] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[    0.357351] vesafb: protected mode interface info at c000:c0b0
[    0.357354] vesafb: pmi: set display start = c00cc113, set palette = c00cc16e
[    0.357357] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    0.357369] vesafb: scrolling: redraw
[    0.357372] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.367032] Console: switching to colour frame buffer device 128x48
[    0.375865] fb0: VESA VGA frame buffer device
[    0.375967] intel_idle: MWAIT substates: 0x22220
[    0.375969] intel_idle: does not run on family 6 model 23
[    0.376006] ERST: Table is not found!
[    0.376083] isapnp: Scanning for PnP cards...
[    0.688093] isapnp: No Plug & Play device found
[    0.690383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.734085] floppy0: no floppy controllers found
[    3.735578] brd: module loaded
[    3.736299] loop: module loaded
[    3.736358] Compaq SMART2 Driver (v 2.6.0)
[    3.736474] HP CISS Driver (v 3.6.26)
[    3.736874] Loading iSCSI transport class v2.0-870.
[    3.737229] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    3.738489] Adaptec aacraid driver 1.1-5[26400]-ms
[    3.738744] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.739024] scsi: <fdomain> Detection failed (no card)
[    3.739122] sym53c416.c: Version 1.0.0-ac
[    3.739207] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    3.739430] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    3.742820] iscsi: registered transport (qla4xxx)
[    3.746171] QLogic iSCSI HBA Driver
[    3.749482] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    3.752859] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    3.756322] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[    3.781010] Failed initialization of WD-7000 SCSI card!
[    3.855689] DC390: clustering now enabled by default. If you get problems load
[    3.859251]        with "disable_clustering=1" and report to maintainers
[    3.862903] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    3.866559] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    3.870191] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    3.873842] mpt2sas version 06.100.00.00 loaded
[    3.877563] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    3.881348] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.885118] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.888890] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    3.892679] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    3.896483] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    3.900277] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    3.904146] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    3.908052] ahci 0000:00:1f.2: version 3.0
[    3.908066] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.911884] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    3.911920] ahci: SSS flag set, parallel bus scan disabled
[    3.915747] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    3.919647] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    3.923575] ahci 0000:00:1f.2: setting latency timer to 64
[    3.933769] scsi2 : ahci
[    3.937702] scsi3 : ahci
[    3.941569] scsi4 : ahci
[    3.945393] scsi5 : ahci
[    3.949195] scsi6 : ahci
[    3.952903] scsi7 : ahci
[    3.956616] ata1: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe900 irq 40
[    3.960295] ata2: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe980 irq 40
[    3.963950] ata3: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffea00 irq 40
[    3.963952] ata4: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffea80 irq 40
[    3.963954] ata5: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb00 irq 40
[    3.963956] ata6: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb80 irq 40
[    3.979842] scsi8 : pata_legacy
[    3.983321] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.438069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.447169] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[    4.450626] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    4.459725] ata1.00: configured for UDMA/133
[    4.463128] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
[    4.466686] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.470185] sd 2:0:0:0: [sda] Write Protect is off
[    4.473601] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.473627] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.527733]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    4.531658] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.351068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.354703] ata2.00: ATAPI: ASUS    DRW-1814BLT, 1.10, max UDMA/66
[    5.358445] ata2.00: configured for UDMA/66
[    5.362707] scsi 3:0:0:0: CD-ROM            ASUS     DRW-1814BLT      1.10 PQ: 0 ANSI: 5
[    5.368940] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.372425] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.375969] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    5.681015] ata3: SATA link down (SStatus 0 SControl 300)
[    5.989014] ata4: SATA link down (SStatus 0 SControl 300)
[    6.297014] ata5: SATA link down (SStatus 0 SControl 300)
[    6.605014] ata6: SATA link down (SStatus 0 SControl 300)
[    6.608622] scsi9 : pata_legacy
[    6.611770] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    6.765288] I2O subsystem v1.325
[    6.768328] i2o: max drivers = 8
[    6.771388] I2O Configuration OSM v1.323
[    6.774360] I2O Bus Adapter OSM v1.317
[    6.777279] I2O Block Device OSM v1.325
[    6.780189] I2O SCSI Peripheral OSM v1.316
[    6.782991] I2O ProcFS OSM v1.316
[    6.785707] Fusion MPT base driver 3.04.17
[    6.788460] Copyright (c) 1999-2008 LSI Corporation
[    6.791285] Fusion MPT SPI Host driver 3.04.17
[    6.794186] Fusion MPT FC Host driver 3.04.17
[    6.797122] Fusion MPT SAS Host driver 3.04.17
[    6.800090] Fusion MPT misc device (ioctl) driver 3.04.17
[    6.803041] mptctl: Registered with Fusion MPT base driver
[    6.806028] mptctl: /dev/mptctl @ (major,minor=10,220)
[    6.809057] Fusion MPT LAN driver 3.04.17
[    6.812183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.815403] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.818711] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    6.818713] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.821989] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    6.833030] ehci_hcd 0000:00:1a.7: debug port 1
[    6.840148] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    6.840159] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5fffc00
[    6.853009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    6.856192] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.859368] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.862519] usb usb1: Product: EHCI Host Controller
[    6.865609] usb usb1: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[    6.868702] usb usb1: SerialNumber: 0000:00:1a.7
[    6.871841] hub 1-0:1.0: USB hub found
[    6.874792] hub 1-0:1.0: 6 ports detected
[    6.877790] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.880763] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    6.880766] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.883731] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    6.891030] ehci_hcd 0000:00:1d.7: debug port 1
[    6.897805] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    6.897815] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5fff800
[    6.910006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    6.912793] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    6.915596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.918466] usb usb2: Product: EHCI Host Controller
[    6.921374] usb usb2: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[    6.924362] usb usb2: SerialNumber: 0000:00:1d.7
[    6.927412] hub 2-0:1.0: USB hub found
[    6.930342] hub 2-0:1.0: 6 ports detected
[    6.933351] 116x: driver isp116x-hcd, 03 Nov 2005
[    6.936299] driver isp1362-hcd, 2005-04-04
[    6.939249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.942287] uhci_hcd: USB Universal Host Controller Interface driver
[    6.945348] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.948458] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    6.948461] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.951592] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.962032] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    6.965189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    6.968359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.971564] usb usb3: Product: UHCI Host Controller
[    6.974778] usb usb3: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    6.978017] usb usb3: SerialNumber: 0000:00:1a.0
[    6.981326] hub 3-0:1.0: USB hub found
[    6.984513] hub 3-0:1.0: 2 ports detected
[    6.987745] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    6.990958] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    6.990961] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    6.994147] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    7.005031] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    7.008233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    7.011447] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.014695] usb usb4: Product: UHCI Host Controller
[    7.017948] usb usb4: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    7.021188] usb usb4: SerialNumber: 0000:00:1a.1
[    7.024493] hub 4-0:1.0: USB hub found
[    7.027655] hub 4-0:1.0: 2 ports detected
[    7.030865] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.034105] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    7.034108] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    7.037336] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    7.048023] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    7.051277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    7.054550] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.057833] usb usb5: Product: UHCI Host Controller
[    7.061094] usb usb5: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    7.064401] usb usb5: SerialNumber: 0000:00:1a.2
[    7.067800] hub 5-0:1.0: USB hub found
[    7.071047] hub 5-0:1.0: 2 ports detected
[    7.074341] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    7.077619] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    7.077622] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    7.080894] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    7.092023] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    7.095326] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    7.098679] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.102050] usb usb6: Product: UHCI Host Controller
[    7.105409] usb usb6: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    7.108770] usb usb6: SerialNumber: 0000:00:1d.0
[    7.112198] hub 6-0:1.0: USB hub found
[    7.115482] hub 6-0:1.0: 2 ports detected
[    7.118815] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.122154] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    7.122157] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    7.125495] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    7.136031] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    7.139341] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    7.142641] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.145947] usb usb7: Product: UHCI Host Controller
[    7.149238] usb usb7: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    7.152555] usb usb7: SerialNumber: 0000:00:1d.1
[    7.155981] hub 7-0:1.0: USB hub found
[    7.159262] hub 7-0:1.0: 2 ports detected
[    7.162597] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.165934] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    7.165936] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    7.169261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    7.180023] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    7.183324] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    7.186016] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    7.189944] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.193308] usb usb8: Product: UHCI Host Controller
[    7.196665] usb usb8: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[    7.200075] usb usb8: SerialNumber: 0000:00:1d.2
[    7.203529] hub 8-0:1.0: USB hub found
[    7.206892] hub 8-0:1.0: 2 ports detected
[    7.210317] sl811: driver sl811-hcd, 19 May 2005
[    7.213641] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    7.217030] Initializing USB Mass Storage driver...
[    7.220375] usbcore: registered new interface driver usb-storage
[    7.223682] USB Mass Storage support registered.
[    7.226994] usbcore: registered new interface driver ums-alauda
[    7.230351] usbcore: registered new interface driver ums-cypress
[    7.233669] usbcore: registered new interface driver ums-datafab
[    7.236974] usbcore: registered new interface driver ums-freecom
[    7.240290] usbcore: registered new interface driver ums-isd200
[    7.243472] usbcore: registered new interface driver ums-jumpshot
[    7.246611] usbcore: registered new interface driver ums-karma
[    7.249687] usbcore: registered new interface driver ums-onetouch
[    7.252692] usbcore: registered new interface driver ums-sddr09
[    7.255642] usbcore: registered new interface driver ums-sddr55
[    7.258506] usbcore: registered new interface driver ums-usbat
[    7.266087] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    7.268916] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    7.272579] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.275649] mice: PS/2 mouse device common for all mice
[    7.278634] md: linear personality registered for level -1
[    7.281603] md: raid0 personality registered for level 0
[    7.284573] md: raid1 personality registered for level 1
[    7.287477] md: raid10 personality registered for level 10
[    7.290349] md: raid6 personality registered for level 6
[    7.293218] md: raid5 personality registered for level 5
[    7.296020] md: raid4 personality registered for level 4
[    7.298757] md: multipath personality registered for level -4
[    7.301587] device-mapper: uevent: version 1.0.3
[    7.301590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    7.307341] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    7.310345] cpuidle: using governor ladder
[    7.313286] cpuidle: using governor menu
[    7.316213] input: Speakup as /devices/virtual/input/input1
[    7.319152] speakup 3.1.6: initialized
[    7.319611] usb 1-1: New USB device found, idVendor=058f, idProduct=6362
[    7.319613] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.319615] usb 1-1: Product: Mass Storage Device
[    7.319616] usb 1-1: Manufacturer: Generic
[    7.319617] usb 1-1: SerialNumber: 058F312D81B
[    7.336188] synth name on entry is: (null)
[    7.336245] scsi10 : usb-storage 1-1:1.0
[    7.341791] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    7.344708] TCP cubic registered
[    7.347521] Initializing XFRM netlink socket
[    7.350329] NET: Registered protocol family 17
[    7.353123] Registering the dns_resolver key type
[    7.355902] Using IPI No-Shortcut mode
[    7.358738] registered taskstats version 1
[    7.361778] md: Waiting for all devices to be available before autodetect
[    7.364671] md: If you don't use raid, use raid=noautodetect
[    7.364782] md: Autodetecting RAID arrays.
[    7.364784] md: Scanned 0 and added 0 devices.
[    7.364785] md: autorun ...
[    7.364786] md: ... autorun DONE.
[    7.379666] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    7.382998] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    7.399559] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.402857] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    7.410919] devtmpfs: mounted
[    7.414117] Freeing unused kernel memory: 612k freed
[    7.417414] Write protecting the kernel text: 10108k
[    7.420571] Write protecting the kernel read-only data: 2540k
[    7.644014] usb 6-1: new low speed USB device using uhci_hcd and address 2
[    7.808484] usb 6-1: New USB device found, idVendor=18b1, idProduct=0037
[    7.811829] usb 6-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    7.815218] usb 6-1: Product: irMAKbd pl
[    7.818626] usb 6-1: Manufacturer: ELMAK.pl
[    8.030011] usb 6-2: new low speed USB device using uhci_hcd and address 3
[    8.196567] usb 6-2: New USB device found, idVendor=046d, idProduct=c03e
[    8.199942] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.203254] usb 6-2: Product: USB-PS/2 Optical Mouse
[    8.206635] usb 6-2: Manufacturer: Logitech
[    8.223246] udev[1266]: starting version 165
[    8.336724] scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    8.341606] scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    8.345487] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[    8.350223] scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    8.354242] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[    8.359588] sd 10:0:0:2: [sdd] Attached SCSI removable disk
[    8.363041] scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    8.380222] sd 10:0:0:3: [sde] Attached SCSI removable disk
[    8.461822] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.482880] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    8.486430] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [??? 0x00000400-0x0000040f flags 0x47]
[    8.493789] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.505686] firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    8.520972] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
[    8.525131] generic-usb 0003:046D:C03E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[    8.533469] usbcore: registered new interface driver usbhid
[    8.537739] usbhid: USB HID core driver
[    8.549690] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    8.556175] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    8.560725] firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    8.569564] sd 10:0:0:0: Attached scsi generic sg2 type 0
[    8.575836] ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.577838] sd 10:0:0:1: Attached scsi generic sg3 type 0
[    8.578292] sd 10:0:0:2: Attached scsi generic sg4 type 0
[    8.578737] sd 10:0:0:3: Attached scsi generic sg5 type 0
[    8.593262] ATL1E 0000:04:00.0: setting latency timer to 64
[    8.668462] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    8.672883] ACPI: Power Button [PWRB]
[    8.677252] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.681643] ACPI: Power Button [PWRF]
[    8.705720] IR NEC protocol handler initialized
[    8.709675] petalynx 0003:18B1:0037.0001: fixing up Petalynx Maxter Remote report descriptor
[    8.711173] input: ELMAK.pl irMAKbd pl as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[    8.712542] petalynx 0003:18B1:0037.0001: input,hiddev0,hidraw1: USB HID v1.00 Mouse [ELMAK.pl irMAKbd pl] on usb-0000:00:1d.0-1/input0
[    8.734568] IR RC5(x) protocol handler initialized
[    8.740295] Linux video capture interface: v2.00
[    8.760127] Linux agpgart interface v0.103
[    8.775311] IR RC6 protocol handler initialized
[    8.783149] IR JVC protocol handler initialized
[    8.796845] IR Sony protocol handler initialized
[    8.803602] rtc_cmos 00:03: RTC can wake from S4
[    8.811076] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    8.815633] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    8.824777] lirc_dev: IR Remote Control driver registered, major 243 
[    8.827679] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[    8.827714] cx8800 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.828781] cx88[0]: subsystem: 107d:6f2b, board: WinFast DTV2000 H rev. J [card=82,autodetected], frontend(s): 1
[    8.828783] cx88[0]: TV tuner type 63, Radio tuner type -1
[    8.904775] AV200 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.040600] ACPI: acpi_idle registered with cpuidle
[    9.045460] cx2388x alsa driver version 0.0.8 loaded
[    9.045784] IR LIRC bridge handler initialized
[    9.046060] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[    9.066084] firewire_core: created device fw0: GUID 001e8c000148ebc3, S400
[    9.561276] tuner 0-0043: chip found @ 0x86 (cx88[0])
[    9.684377] nvidia: module license 'NVIDIA' taints kernel.
[    9.688668] Disabling lock debugging due to kernel taint
[    9.693693] tda9887 0-0043: creating new instance
[    9.698398] tda9887 0-0043: tda988[5/6/7] found
[    9.706886] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[   10.240797] tuner-simple 0-0061: creating new instance
[   10.244797] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[   10.489529] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.493601] nvidia 0000:01:00.0: setting latency timer to 64
[   10.493605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   10.497826] NVRM: loading NVIDIA UNIX x86 Kernel Module  270.41.06  Mon Apr 18 14:54:25 PDT 2011
[   10.580005] Registered IR keymap rc-winfast
[   10.584241] input: cx88 IR (WinFast DTV2000 H rev. as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input6
[   10.588661] rc0: cx88 IR (WinFast DTV2000 H rev. as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
[   10.593172] cx88[0]/0: found at 0000:06:01.0, rev: 5, irq: 17, latency: 64, mmio: 0xfb000000
[   10.597713] cx88[0]/0: registered device video0 [v4l2]
[   10.602177] cx88[0]/0: registered device vbi0
[   10.606522] cx88[0]/0: registered device radio0
[   10.612431] cx88[0]/2: cx2388x 8802 Driver Manager
[   10.616706] cx88-mpeg driver manager 0000:06:01.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.621005] cx88[0]/2: found at 0000:06:01.2, rev: 5, irq: 17, latency: 64, mmio: 0xfd000000
[   10.625284] cx88_audio 0000:06:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.629493] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[   10.755675] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[   10.759735] cx88/2: registering cx8802 driver, type: dvb access: shared
[   10.763816] cx88[0]/2: subsystem: 107d:6f2b, board: WinFast DTV2000 H rev. J [card=82]
[   10.767985] cx88[0]/2: cx2388x based DVB/ATSC card
[   10.772124] cx8802_alloc_frontends() allocating 1 frontend(s)
[   10.798711] tuner-simple 0-0061: attaching existing instance
[   10.802956] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[   10.809519] DVB: registering new adapter (cx88[0])
[   10.813819] DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[   10.910455] fuse init (API version 7.15)
[   11.025073] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.070548] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.317346] ppdev: user-space parallel port driver
[   11.331028] lp: driver loaded but no devices found
[   14.844341] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   14.866934] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   14.890628] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   14.937203] XFS mounting filesystem sda7
[   15.077201] Ending clean XFS mount for filesystem: sda7
[   15.119824] XFS mounting filesystem sda8
[   15.228367] Ending clean XFS mount for filesystem: sda8
Plik /var/log/Xorg.0.log:

Kod: Zaznacz cały

[    30.845] 
X.Org X Server 1.9.5
Release Date: 2011-03-17
[    30.845] X Protocol Version 11, Revision 0
[    30.845] Build Operating System: Slackware 13.37 Slackware Linux Project
[    30.845] Current Operating System: Linux slackware 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686
[    30.845] Kernel command line: BOOT_IMAGE=Slackware_13.37 ro root=801 vt.default_utf8=1
[    30.845] Build Date: 18 March 2011  12:08:03AM
[    30.845]  
[    30.852] Current version of pixman: 0.20.2
[    30.852] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.852] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.852] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 17 10:45:02 2011
[    30.900] (==) Using config file: "/etc/X11/xorg.conf"
[    30.900] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.919] (==) ServerLayout "Layout0"
[    30.919] (**) |-->Screen "Screen0" (0)
[    30.919] (**) |   |-->Monitor "Monitor0"
[    30.919] (**) |   |-->Device "Device0"
[    30.919] (**) |-->Input Device "Keyboard0"
[    30.919] (**) |-->Input Device "Mouse0"
[    30.919] (**) Option "Xinerama" "0"
[    30.919] (==) Automatically adding devices
[    30.919] (==) Automatically enabling devices
[    30.954] (WW) The directory "/usr/share/fonts/local" does not exist.
[    30.954] 	Entry deleted from font path.
[    30.954] (WW) The directory "/usr/share/fonts/CID" does not exist.
[    30.954] 	Entry deleted from font path.
[    30.954] (**) FontPath set to:
	/usr/lib/X11/fonts/misc/:unscaled,
	/usr/lib/X11/fonts/100dpi/:unscaled,
	/usr/lib/X11/fonts/75dpi/:unscaled,
	/usr/lib/X11/fonts/misc/,
	/usr/lib/X11/fonts/Type1/,
	/usr/lib/X11/fonts/Speedo/,
	/usr/lib/X11/fonts/100dpi/,
	/usr/lib/X11/fonts/75dpi/,
	/usr/lib/X11/fonts/cyrillic/,
	/usr/lib/X11/fonts/TTF/,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic
[    30.954] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.954] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    30.954] (WW) Disabling Keyboard0
[    30.954] (WW) Disabling Mouse0
[    30.954] (II) Loader magic: 0x81f0f80
[    30.954] (II) Module ABI versions:
[    30.954] 	X.Org ANSI C Emulation: 0.4
[    30.954] 	X.Org Video Driver: 8.0
[    30.954] 	X.Org XInput driver : 11.0
[    30.954] 	X.Org Server Extension : 4.0
[    30.955] (--) PCI:*(0:1:0:0) 10de:0622:1043:827c rev 161, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[    30.955] (--) PCI: (0:6:1:0) 14f1:8800:107d:6f2b rev 5, Mem @ 0xfb000000/16777216
[    30.955] (II) Open ACPI successful (/var/run/acpid.socket)
[    30.955] (II) LoadModule: "extmod"
[    30.977] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    30.983] (II) Module extmod: vendor="X.Org Foundation"
[    30.983] 	compiled for 1.9.5, module version = 1.0.0
[    30.983] 	Module class: X.Org Server Extension
[    30.983] 	ABI class: X.Org Server Extension, version 4.0
[    30.983] (II) Loading extension MIT-SCREEN-SAVER
[    30.983] (II) Loading extension XFree86-VidModeExtension
[    30.983] (II) Loading extension XFree86-DGA
[    30.983] (II) Loading extension DPMS
[    30.983] (II) Loading extension XVideo
[    30.983] (II) Loading extension XVideo-MotionCompensation
[    30.983] (II) Loading extension X-Resource
[    30.983] (II) LoadModule: "dbe"
[    30.983] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    30.983] (II) Module dbe: vendor="X.Org Foundation"
[    30.983] 	compiled for 1.9.5, module version = 1.0.0
[    30.984] 	Module class: X.Org Server Extension
[    30.984] 	ABI class: X.Org Server Extension, version 4.0
[    30.984] (II) Loading extension DOUBLE-BUFFER
[    30.984] (II) LoadModule: "glx"
[    30.984] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    32.583] (II) Module glx: vendor="NVIDIA Corporation"
[    32.583] 	compiled for 4.0.2, module version = 1.0.0
[    32.583] 	Module class: X.Org Server Extension
[    32.583] (II) NVIDIA GLX Module  270.41.06  Mon Apr 18 15:11:28 PDT 2011
[    32.583] (II) Loading extension GLX
[    32.583] (II) LoadModule: "record"
[    32.584] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    32.590] (II) Module record: vendor="X.Org Foundation"
[    32.590] 	compiled for 1.9.5, module version = 1.13.0
[    32.590] 	Module class: X.Org Server Extension
[    32.590] 	ABI class: X.Org Server Extension, version 4.0
[    32.590] (II) Loading extension RECORD
[    32.590] (II) LoadModule: "dri"
[    32.590] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    32.602] (II) Module dri: vendor="X.Org Foundation"
[    32.602] 	compiled for 1.9.5, module version = 1.0.0
[    32.602] 	ABI class: X.Org Server Extension, version 4.0
[    32.602] (II) Loading extension XFree86-DRI
[    32.602] (II) LoadModule: "dri2"
[    32.603] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.603] (II) Module dri2: vendor="X.Org Foundation"
[    32.603] 	compiled for 1.9.5, module version = 1.2.0
[    32.603] 	ABI class: X.Org Server Extension, version 4.0
[    32.603] (II) Loading extension DRI2
[    32.603] (II) LoadModule: "nvidia"
[    32.603] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    32.644] (II) Module nvidia: vendor="NVIDIA Corporation"
[    32.644] 	compiled for 4.0.2, module version = 1.0.0
[    32.644] 	Module class: X.Org Video Driver
[    32.664] (II) NVIDIA dlloader X Driver  270.41.06  Mon Apr 18 14:55:51 PDT 2011
[    32.666] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    32.672] (++) using VT number 7

[    32.690] (II) Loading sub module "fb"
[    32.690] (II) LoadModule: "fb"
[    32.691] (II) Loading /usr/lib/xorg/modules/libfb.so
[    32.701] (II) Module fb: vendor="X.Org Foundation"
[    32.701] 	compiled for 1.9.5, module version = 1.0.0
[    32.701] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.701] (II) Loading sub module "wfb"
[    32.701] (II) LoadModule: "wfb"
[    32.705] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    32.716] (II) Module wfb: vendor="X.Org Foundation"
[    32.716] 	compiled for 1.9.5, module version = 1.0.0
[    32.716] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.716] (II) Loading sub module "ramdac"
[    32.716] (II) LoadModule: "ramdac"
[    32.716] (II) Module "ramdac" already built-in
[    32.729] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    32.729] (==) NVIDIA(0): RGB weight 888
[    32.729] (==) NVIDIA(0): Default visual is TrueColor
[    32.729] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.729] (**) NVIDIA(0): Option "TwinView" "0"
[    32.729] (**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0"
[    34.308] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    34.308] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    34.309] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[    34.309] (--) NVIDIA(0): Memory: 524288 kBytes
[    34.309] (--) NVIDIA(0): VideoBIOS: 62.94.11.00.03
[    34.309] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[    34.309] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    34.309] (--) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0
[    34.309] (--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
[    34.309] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[    34.309] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[    34.378] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    34.378] (II) NVIDIA(0): Validated modes:
[    34.378] (II) NVIDIA(0):     "1680x1050_60+0+0"
[    34.378] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    34.402] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[    34.402] (--) NVIDIA(0):     option
[    34.402] (--) Depth 24 pixmap format is 32 bpp
[    34.402] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    34.408] (II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
[    34.450] (II) Loading extension NV-GLX
[    34.492] (==) NVIDIA(0): Disabling shared memory pixmaps
[    34.492] (==) NVIDIA(0): Backing store disabled
[    34.492] (==) NVIDIA(0): Silken mouse enabled
[    34.493] (**) NVIDIA(0): DPMS enabled
[    34.493] (II) Loading extension NV-CONTROL
[    34.493] (II) Loading extension XINERAMA
[    34.493] (II) Loading sub module "dri2"
[    34.493] (II) LoadModule: "dri2"
[    34.493] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[    34.493] (II) NVIDIA(0): [DRI2] Setup complete
[    34.493] (==) RandR enabled
[    34.493] (II) Initializing built-in extension Generic Event Extension
[    34.493] (II) Initializing built-in extension SHAPE
[    34.493] (II) Initializing built-in extension MIT-SHM
[    34.493] (II) Initializing built-in extension XInputExtension
[    34.493] (II) Initializing built-in extension XTEST
[    34.493] (II) Initializing built-in extension BIG-REQUESTS
[    34.493] (II) Initializing built-in extension SYNC
[    34.493] (II) Initializing built-in extension XKEYBOARD
[    34.493] (II) Initializing built-in extension XC-MISC
[    34.493] (II) Initializing built-in extension XINERAMA
[    34.493] (II) Initializing built-in extension XFIXES
[    34.493] (II) Initializing built-in extension RENDER
[    34.493] (II) Initializing built-in extension RANDR
[    34.493] (II) Initializing built-in extension COMPOSITE
[    34.493] (II) Initializing built-in extension DAMAGE
[    34.496] (II) Initializing extension GLX
[    34.898] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    34.898] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.898] (**) Power Button: Applying InputClass "keyboard-all"
[    34.898] (II) LoadModule: "evdev"
[    34.898] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.906] (II) Module evdev: vendor="X.Org Foundation"
[    34.906] 	compiled for 1.9.3, module version = 2.6.0
[    34.906] 	Module class: X.Org XInput Driver
[    34.906] 	ABI class: X.Org XInput driver, version 11.0
[    34.906] (**) Power Button: always reports core events
[    34.906] (**) Power Button: Device: "/dev/input/event4"
[    34.910] (--) Power Button: Found keys
[    34.910] (II) Power Button: Configuring as keyboard
[    34.910] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.910] (**) Option "xkb_rules" "evdev"
[    34.910] (**) Option "xkb_model" "evdev"
[    34.910] (**) Option "xkb_layout" "us"
[    34.910] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    34.929] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    34.929] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.929] (**) Power Button: Applying InputClass "keyboard-all"
[    34.929] (**) Power Button: always reports core events
[    34.929] (**) Power Button: Device: "/dev/input/event3"
[    34.933] (--) Power Button: Found keys
[    34.933] (II) Power Button: Configuring as keyboard
[    34.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.933] (**) Option "xkb_rules" "evdev"
[    34.933] (**) Option "xkb_model" "evdev"
[    34.933] (**) Option "xkb_layout" "us"
[    34.933] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    34.937] (II) config/udev: Adding input device ELMAK.pl irMAKbd pl (/dev/input/event5)
[    34.937] (**) ELMAK.pl irMAKbd pl: Applying InputClass "evdev pointer catchall"
[    34.937] (**) ELMAK.pl irMAKbd pl: Applying InputClass "evdev keyboard catchall"
[    34.937] (**) ELMAK.pl irMAKbd pl: Applying InputClass "keyboard-all"
[    34.937] (**) ELMAK.pl irMAKbd pl: always reports core events
[    34.937] (**) ELMAK.pl irMAKbd pl: Device: "/dev/input/event5"
[    34.943] (--) ELMAK.pl irMAKbd pl: Found 3 mouse buttons
[    34.943] (--) ELMAK.pl irMAKbd pl: Found scroll wheel(s)
[    34.943] (--) ELMAK.pl irMAKbd pl: Found relative axes
[    34.943] (--) ELMAK.pl irMAKbd pl: Found x and y relative axes
[    34.943] (--) ELMAK.pl irMAKbd pl: Found absolute axes
[    34.943] (--) ELMAK.pl irMAKbd pl: Found keys
[    34.943] (II) ELMAK.pl irMAKbd pl: Configuring as mouse
[    34.943] (II) ELMAK.pl irMAKbd pl: Configuring as keyboard
[    34.943] (II) ELMAK.pl irMAKbd pl: Adding scrollwheel support
[    34.943] (**) ELMAK.pl irMAKbd pl: YAxisMapping: buttons 4 and 5
[    34.943] (**) ELMAK.pl irMAKbd pl: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.943] (II) XINPUT: Adding extended input device "ELMAK.pl irMAKbd pl" (type: KEYBOARD)
[    34.943] (**) Option "xkb_rules" "evdev"
[    34.943] (**) Option "xkb_model" "evdev"
[    34.943] (**) Option "xkb_layout" "us"
[    34.943] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    34.943] (**) ELMAK.pl irMAKbd pl: (accel) keeping acceleration scheme 1
[    34.943] (**) ELMAK.pl irMAKbd pl: (accel) acceleration profile 0
[    34.943] (**) ELMAK.pl irMAKbd pl: (accel) acceleration factor: 2.000
[    34.943] (**) ELMAK.pl irMAKbd pl: (accel) acceleration threshold: 4
[    34.943] (II) ELMAK.pl irMAKbd pl: initialized for relative axes.
[    34.943] (WW) ELMAK.pl irMAKbd pl: ignoring absolute axes.
[    34.943] (II) config/udev: Adding input device ELMAK.pl irMAKbd pl (/dev/input/mouse1)
[    34.943] (II) No input driver/identifier specified (ignoring)
[    34.944] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[    34.944] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    34.944] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    34.944] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[    34.951] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[    34.951] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    34.951] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[    34.951] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    34.951] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    34.951] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.951] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    34.951] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    34.951] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    34.951] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    34.951] (II) No input driver/identifier specified (ignoring)
[    34.952] (II) config/udev: Adding input device cx88 IR (WinFast DTV2000 H rev. (/dev/input/event6)
[    34.952] (**) cx88 IR (WinFast DTV2000 H rev.: Applying InputClass "evdev keyboard catchall"
[    34.952] (**) cx88 IR (WinFast DTV2000 H rev.: Applying InputClass "keyboard-all"
[    34.952] (**) cx88 IR (WinFast DTV2000 H rev.: always reports core events
[    34.952] (**) cx88 IR (WinFast DTV2000 H rev.: Device: "/dev/input/event6"
[    34.959] (--) cx88 IR (WinFast DTV2000 H rev.: Found keys
[    34.959] (II) cx88 IR (WinFast DTV2000 H rev.: Configuring as keyboard
[    34.959] (II) XINPUT: Adding extended input device "cx88 IR (WinFast DTV2000 H rev." (type: KEYBOARD)
[    34.959] (**) Option "xkb_rules" "evdev"
[    34.959] (**) Option "xkb_model" "evdev"
[    34.959] (**) Option "xkb_layout" "us"
[    34.959] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    34.962] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    34.962] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.962] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[    34.962] (**) AT Translated Set 2 keyboard: always reports core events
[    34.962] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    34.967] (--) AT Translated Set 2 keyboard: Found keys
[    34.967] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    34.967] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    34.967] (**) Option "xkb_rules" "evdev"
[    34.967] (**) Option "xkb_model" "evdev"
[    34.967] (**) Option "xkb_layout" "us"
[    34.967] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    34.970] (II) config/udev: Adding input device Speakup (/dev/input/event1)
[    34.970] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[    34.970] (**) Speakup: Applying InputClass "keyboard-all"
[    34.970] (**) Speakup: always reports core events
[    34.970] (**) Speakup: Device: "/dev/input/event1"
[    34.976] (--) Speakup: Found keys
[    34.976] (II) Speakup: Configuring as keyboard
[    34.976] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD)
[    34.976] (**) Option "xkb_rules" "evdev"
[    34.976] (**) Option "xkb_model" "evdev"
[    34.976] (**) Option "xkb_layout" "us"
[    34.976] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
jest coś ciekawego w X.org.log ?
Domyślam się, że chodziło o to co podałem czyli plik /var/log/Xorg.0.log ?

Re: Proces X - duże obciążenia CPU

: 2011-05-19, 21:30
autor: addos
@joachim726
Dobrze rozumiem, że mogę podmienić KWin z OpenBox'em?
Używasz tego w połączeniu z KDE4?
Jak to działa i czy nie ma zgrzytów z żadnymi programami?

Re: Proces X - duże obciążenia CPU

: 2011-05-27, 20:43
autor: joachim726
@Addos:OpenBox i KDE prezentują inne podejścia do sprawy. Sugerowałbym Ci instalację OpenBox'a obok KDE (nie powinno byc kolizji) i wypróbowanie. OpenBox jest lżejszy, ale nie posiada np. ikonek, pasków zadań itp. (dla mnie jest to wielką zaletą), jednak nie każdemu odpowiada. Tak naprawdę OpenBox to jedynie manager okien, ale w roli środowiska graficznego sprawuje się dobrze. Do tego można dodac inne elementy, np. coś do wyświetlania tapety i masz samodzielnie złożone z "klocków" środowisko graficzne, zgodne z Twoimi preferencjami, szczególnie polecam do tego dodac emulator terminana yaquake, nie zaśmieca pasków (których i tak nie ma w OpenBox'ie , musisz dodac coś do ich wyświetlania, jeśli chcesz je miec :mrgreen: ), po prostu wsuwa się i wysuwa z góry ekranu, po naciśnięciu F12 (tutaj mogą byc kolizje), polecam dodac do "autostartu". Mam nadzieje, że pomogłem.

Re: Proces X - duże obciążenia CPU

: 2011-05-28, 09:12
autor: addos
Pomogłeś i zaciekawiłeś mnie.
W wolnej chwili sprawdzę sobie jak to działa i wygląda.

Dzięki za info :)

Re: Proces X - duże obciążenia CPU

: 2011-05-28, 20:06
autor: joachim726
Proszę :) , jako alternatywy dla OpenBox'a, możesz wykorzystac inne pochodne OpenBox'a, jednak z nim miałem najwięcej doczynienia.

Re: Proces X - duże obciążenia CPU

: 2011-06-05, 01:55
autor: Bunczu
joachim726 pisze:addos:Może nie jest to odpowiedź bezpośrednio na temat, ale OpenBox (i ogólnie wszystkie pochodne BlackBox'a) zajmóją mniej zasobów niż KDE... (do tego polecam emulator terminala yaqake (chyba tak się pisze))
Tak na marginesie ;) nie zwalałbym winy na samo KDE. Mam u siebie Slaka, 13.37 - system 32 bitowy - który ze wszystkimi efektami (za wyjątkiem rozmywania) KDE działa płynnie, z pełną prędkością na zintegrowanej grafice w czipset 760G - HD3000 to nie potwór, a radzi sobie bez najmniejszych problemów z tymi efektami środowiska graficznego (jedynie rozmycie okien potrafi go zwolnić. Średnia prędkość wg. miernika FPS w KDE z bajerami u mnie to 100FPS, jak włączę tylko rozmycie okien - leci do 20 i całość chodzi wolno), wystarczy tylko ten jeden efekt odznaczyć i tyle.

Kolega ma 9600GT, a więc kilkunastokrotnie mocniejszą kartę niż moja integra, na tym każde środowisko powinno śmigać ;)