slackware 12.0 i pierwsze problemy
Moderatorzy: Moderatorzy, Administratorzy
Re: slackware 12.0 i pierwsze problemy
przemek_11, to nie wina Patricka, tylko modularnych X-ów.
Error 404 - footer not found
Re: slackware 12.0 i pierwsze problemy
To dziwne, ale na NetBSD mam tą samą wersję modularnego serwera i wszsytko mi działa normalnie przy tych samych ustawieniach/sterownikach.
Motylek
Motylek
- przemek_11
- Użytkownik
- Posty: 384
- Rejestracja: 2005-03-01, 15:58
- Lokalizacja: Zaborze
Re: slackware 12.0 i pierwsze problemy
Wiem. Ale co by szkodzilo zebranie tych wszystkich libX*, *proto* i innych pierdolek w jedna paczke xorg-7.2*tgz?Lizard pisze:przemek_11, to nie wina Patricka, tylko modularnych X-ów.
Pozdrawiam
Re: slackware 12.0 i pierwsze problemy
Gdyby nie szkodziło, to zapewne nie powstałyby modularne X-y.
Error 404 - footer not found
Re: slackware 12.0 i pierwsze problemy
brak dzwieku po restarcie
[SOLVED] dodalem druga karte dzwiekowa do blacklist i jest oK [SOLVED]
[SOLVED] dodalem druga karte dzwiekowa do blacklist i jest oK [SOLVED]
Ostatnio zmieniony 2007-07-15, 19:22 przez misiek, łącznie zmieniany 1 raz.
"The problem with Death is that it doesn't allow for feelings.
The trouble with feelings is that they don't consider death."
The trouble with feelings is that they don't consider death."
-
- Użytkownik
- Posty: 21
- Rejestracja: 2006-10-10, 12:25
Re: slackware 12.0 i pierwsze problemy
Nie wiem czy mogę to tu wsadzić, ale temat brzmi dość ogólnie wiec wkleje tu.
Problem polega na tym, że przy uruchomieniu slacka12 na dysku SATAII procesorze Core2 duo otrzymuje takie komunikaty:
Co to jest?? czy jest to groźne, i jeżeli jest to groźne to jak się tego pozbyć.
Najpierw mialem partycje wymiany na koncu a partycje "/" na początku. Potem przeorganizowalem partycje i swapa dałęm pierwszego i zrobiłem dwie partycje na "/" i na "/home". Czy może to być wina dysku??
[ Komentarz dodany przez: difrost: 2007-07-23, 10:01 ]
Panie, tyle czasu siedzicie na Forum, a
Problem polega na tym, że przy uruchomieniu slacka12 na dysku SATAII procesorze Core2 duo otrzymuje takie komunikaty:
Kod: Zaznacz cały
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
Najpierw mialem partycje wymiany na koncu a partycje "/" na początku. Potem przeorganizowalem partycje i swapa dałęm pierwszego i zrobiłem dwie partycje na "/" i na "/home". Czy może to być wina dysku??
[ Komentarz dodany przez: difrost: 2007-07-23, 10:01 ]
Panie, tyle czasu siedzicie na Forum, a
Kod: Zaznacz cały
używać nie umiecie? :mrgreen:
Ostatnio zmieniony 2007-07-23, 09:00 przez Jan van Czura, łącznie zmieniany 2 razy.
Re: slackware 12.0 i pierwsze problemy
CHANGES_AND_HINTS.TXT pisze: As stated earlier, it is recommended that you use one of the generic kernels
rather than the huge kernels; the huge kernel is primarily intended as
an "installer" and "emergency" kernel in case you forget to make an initrd.
However, if you do use one of the huge kernels, you will likely encounter
errors like this:
kobject_add failed for uhci_hcd with -EEXIST, don't try to register
These occur because the respective drivers are compiled statically into the
huge kernels but udev tries to load them anyway. These errors should be safe
to ignore, but if you really don't want them to appear, you can blacklist the
modules that try to load in /etc/modprobe.d/blacklist. However, make sure you
remove them from the blacklist if you ever decide to use the (recommended)
generic kernels.
[url=http://bdtk.sourceforge.net][img]http://pin.if.uz.zgora.pl/~beton/bdt-ready.png[/img][/url] #337142
--------------------------------------------
"I had a letter in the post today. It said 'Gas Bill'. It sounds a tempting offer." -- Alan Cox
"Users have been trained that when a computer bluescreens and losing all of their data, it's either (a) just the way things are, or (b) it's microsoft's fault." -- Theodore Tso
--------------------------------------------
"I had a letter in the post today. It said 'Gas Bill'. It sounds a tempting offer." -- Alan Cox
"Users have been trained that when a computer bluescreens and losing all of their data, it's either (a) just the way things are, or (b) it's microsoft's fault." -- Theodore Tso
-
- Użytkownik
- Posty: 21
- Rejestracja: 2006-10-10, 12:25
Re: slackware 12.0 i pierwsze problemy
DZięki, w takim razie oleje to.