Witam,
mam nadzieje ze to odpowiedni temat do mojego problemu.
Zainstalowałem neo, wg. pozyższych wskazówek. Działa. Problem w tym, ze po jakimś bliżej nie zidentyfikowanym czasie modem się wiesza. Tensam problem miałem używając starych sterów (eagle-usb), tylko ze wtedy po wyciągnięciu wtyczki usb z modemu, cały system mi się wieszał. Kernel panic. jak kogos to interesuje, moge poszukać logów...
sporo googlowałem i dochodze do wniosku ze to nie koniecznie jest wina sterownika, lecz może byc firmware.
tych całych DSPep.bin, lub CMV...
troszke logów z /var/log/messages
May 13 10:07:37 higashi pppd[3340]: No response to 4 echo-requests
May 13 10:07:37 higashi pppd[3340]: Serial link appears to be disconnected.
May 13 10:07:37 higashi pppd[3340]: Connect time 36.5 minutes.
May 13 10:07:37 higashi pppd[3340]: Sent 11348999 bytes, received 39734020 bytes.
May 13 10:07:43 higashi pppd[3340]: Connection terminated.
May 13 10:07:43 higashi pppd[3340]: Modem hangup
May 13 10:08:13 higashi pppd[3340]: Using interface ppp0
May 13 10:08:13 higashi pppd[3340]: Connect: ppp0 <--> 0.35
May 13 10:08:43 higashi pppd[3340]: Connection terminated.
May 13 10:08:43 higashi pppd[3340]: Modem hangup
...
po rmmod ueagle-atm i usbatm i załadowaniu ich ponownie, przezz jakiś czas działa
a to dmesg z tej operacji
usbcore: deregistering driver ueagle-atm
ATM dev 0: usbatm_complete: urb 0xdfc22f00 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xdf9ad920 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xdfc22e40 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xde9950a0 failed (-108)!
usb 3-2: [UEAGLE-ATM] uea_intr() failed with -108
usb 3-2: [ueagle-atm] ADSL device removed
[ueagle-atm] driver unloaded
[ueagle-atm] driver ueagle-gna 1.3 loaded
usb 3-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) : Eagle I
usb 3-2: reset full speed USB device using uhci_hcd and address 4
usb 3-2: [ueagle-atm] using iso mode
usb 3-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/003-004
usb 3-2: [ueagle-atm] (re)booting started
usbcore: registered new driver ueagle-atm
usb 3-2: [ueagle-atm] modem operational
usb 3-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
usb 3-2: [UEAGLE-ATM] uea_intr() failed with -84
usb 3-2: USB disconnect, address 4
ATM dev 0: usbatm_complete: urb 0xde9950a0 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xdfc22e40 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xde995160 failed (-108)!
ATM dev 0: usbatm_complete: urb 0xde9952e0 failed (-108)!
usb 3-2: [UEAGLE-ATM] usb_control_msg error -19
usb 3-2: [ueagle-atm] ADSL device removed
usb 3-2: new full speed USB device using uhci_hcd and address 5
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) : Eagle I
usb 3-2: reset full speed USB device using uhci_hcd and address 5
usb 3-2: [ueagle-atm] pre-firmware device, uploading firmware
usb 3-2: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw
usb 3-2: [ueagle-atm] firmware uploaded
usb 3-2: USB disconnect, address 5
usb 3-2: new full speed USB device using uhci_hcd and address 6
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) : Eagle I
usb 3-2: reset full speed USB device using uhci_hcd and address 6
usb 3-2: [ueagle-atm] using iso mode
usb 3-2: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/003-006
usb 3-2: [ueagle-atm] (re)booting started
usb 3-2: [ueagle-atm] modem operational
usb 3-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
Z góry dziękuje za odpowiedz.
Pozdrawiam
EDITed
Może dodam jeszcze iż slack stoi na kernelu 2.6.16.14.
ueagle-atm jest z kernela. Pomimo prób, własnoręcznie kompilowane, nie chciało mi działać.
firmware z ww. paczki działa. tyle, ze jw.
ręcznie kompilowane z ueagle-data-src-1.1.tar.gz, działa troche dłużej. mimo to, nie wytrzymuje 24h... jeśli potrzeba więcej info to chętnie podam
Wielki rozum z szaleństwem blisko spokrewniony i cienką jeno ścianką odeń oddzielony
Contradictio in adiecto